Category: Arduino

Heart rate monitoring is a common procedure for most of health related projects. Therefore, producing sensors modules and circuit boards for such tasks will facilitate and push forward the development of new health-tech projects. Maxim Integrated, an analog and mixed-signal integrated...

Dejan Nedelkovski build an Arduino-powered MP3 Music Player plus Alarm Clock. The player has a 3.2" TFT display and the home screen displays time, date and temperature along with touch control buttons. In this project I will show you how you can make an Arduino Touch Screen MP3...

In this video educ8s.tv is going to build a DIY Altimeter using the UBLOX NEO-6M GPS module along with a color OLED display with the SSD1331 driver. About a year ago, I built some GPS projects using this GPS shield. This shield is great but unfortunately it is no longer available for...

Max.K @ hackaday.io designed his own impressive watch based on Atmega328p with Arduino bootloader, Maxim DS3231 (<2min per year deviation),  96x96 pixel Sharp Memory LCD (LS013B4DN04) and it's powered by a CR2025 160mAh coin cell battery. Chronio is an Arduino-based 3D-printed...

Raj @ embedded-lab.com has revised his RGB Matrix Display Shield to an improved version. The shield now also carries the DS1307 RTC chip on board along with a CR1220 coin cell battery holder on the back. It is applicable for driving popular 16×32 RGB matrix panels with HUB75 (8×2...

Last year, Arduino and Microsoft announced a strong partnership and Windows 10 became the world’s first Arduino certified operating system. This partnership made the creation and innovation much easier with the hardware capability of Arduino and the software capabilities of...

A radar system uses high frequency radio waves for object detection. A high-power RF pulse is transmitted into space and its echo reflected off from an obstacle is recorded. By computing the time elapsed between the transmitted and reflected pulses, and knowing that the electromagnetic...

Usually, when measuring a child's height at home, a mark is drawn on the wall then the height is measured using a measuring tape. This process is not always easy and it may has low resolution. In an attempt to simplify this procedure, a new project was developed using an Arduino and a...