Sipeed Launches Tang Primer 25K: A Compact FPGA Module with Dock Carrier Board
FPGA

Sipeed Launches Tang Primer 25K: A Compact FPGA Module with Dock Carrier Board

Sipeed's new Tang Primer 25K FPGA, utilizing the Gowin Semi GW5A-LV25MG121, offers 23,040 LUTs, ample SRAM, multipliers, PLLs, and 64Mb NOR flash memory. Available at $19 for just the module, $29 with a carrier board, and an additional $10 for an optional SDRAM module, it's suitable for...

Continue Reading
1.253
Views
0 Comments
The Tang Mega 138K Pro Dock is Sipeed’s new RISC-V FPGA Development Board
FPGA

The Tang Mega 138K Pro Dock is Sipeed’s new RISC-V FPGA Development Board

Sipeed recently launched the Mega 138K Pro dev board. It's built around the GOWIN GW5AST RISC-V FPGA and features 2x SFP+ ports, a GbE port, dual DVI interfaces, 8x 12.5Gbps Serdes, and other peripherals. The Sipeed Tang series of boards are a family of FPGA development boards powered...

Continue Reading
1.227
Views
0 Comments
Oak Dev Tech’s Low-Power IcyBlue FPGA Feather Development Board
FPGA

Oak Dev Tech’s Low-Power IcyBlue FPGA Feather Development Board

With the help of this exclusive IcyBlue FPGA feather developed by OAK DEV TECH, it is simple to launch an FPGA development project using powerful and dependable ICE5LP4K FPGA from Lattice Semiconductor. The ICE5LP4K includes two hardware I2C and SPI blocks, a bright RGB LED, two user...

Continue Reading
1.192
Views
0 Comments
Antmicro creates an open hardware Xilinx Kintex K410T development board
FPGATop Stories

Antmicro creates an open hardware Xilinx Kintex K410T development board

Antmicro, known for its open hardware ecosystem, has designed the AMD-Xilinx Kintex-7 development board for developers to explore its potential as an RTL prototyping platform. Antmicro has introduced this board as part of its extended open-source SystemVerilog toolchain. The company...

Continue Reading
1.124
Views
0 Comments
An affordable SDI signal generator using Arduino MKR Vidor 4000
ArduinoFPGA

An affordable SDI signal generator using Arduino MKR Vidor 4000

Transmission of video from one location to another in the professional video world is typically done via SDI (Serial Digital Interface). This FPGA-powered device, intended as a test tool for SDI circuits, pushes signals at 1.485 Gbps. Based on an Arduino MKR Vidor 4000, Chris Brown of...

Continue Reading
1.316
Views
0 Comments
Implementing the 100 MHz 6502 In an FPGA
FPGATop Stories

Implementing the 100 MHz 6502 In an FPGA

Jürgen Mülle has posted details of re-implementing the 65C02 in an FPGA, in a pin-compatible format that enables you to upgrade old computers and games to a 100 MHz clock rate! Speaking about the project, Jürgen says: "The idea of implementing a CPU core inside an FPGA is not new,...

Continue Reading
1.271
Views
0 Comments
Meet the upcoming FPGA-Based Eis Board from Machdyne
FPGARaspberry Pi

Meet the upcoming FPGA-Based Eis Board from Machdyne

  Machdyne is an American technology company focused on developing small general-purpose computers, modules, and tools optimized for timeless applications. The company recently unveiled a small FPGA-based board named Eis, which they have been working on for a while now and plan to...

Continue Reading
1.134
Views
0 Comments
Dragon Li’s compact Bajiu Lite Dev Board Provides an Easy Route to Low-power FPGA and RISC-V projects
FPGA

Dragon Li’s compact Bajiu Lite Dev Board Provides an Easy Route to Low-power FPGA and RISC-V projects

Dragon Li Studio is set to launch the small, convenient, and out-of-the-box Bajiu Lite dev board – an open-source resource-rich FPGA development board integrated with RISC-V SoC. The FPGA specialist has tapped into its over-a-decade years of experience in hardware and software to...

Continue Reading
1.160
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives