Category: IC

Program includes a pre-designed carrier chip and automated open source design flow from Efabless SkyWater’s open source SKY130 process is the first node to be used to fabricate chips for the program Initiative removes access barriers by significantly reducing cost and the...

Analog Devices Inc. LT8491 Buck-Boost Battery Charge Controller implements a constant-current constant voltage (CCCV) charging profile used for most battery types. This includes sealed lead-acid (SLA), flooded, gel, and lithium-ion. The device operates from input voltages above,...

Maxim Integrated MAX20361 Single-Cell/Multi-Cell Solar Harvester is a fully integrated solution for harvesting energy from single-cell and multi-cell solar sources. The MAX20361 includes an ultra-low quiescent current (360nA) boost converter that is capable of starting from input...

Maxim's MAX17227A is a 400 mV to 5.5 V input, 2 A nanoPower boost converter with short-circuit protection and True Shutdown™ Maxim's MAX17227A is a nanoPower boost converter, capable of delivering a load up to 2 A peak inductor current and providing True Shutdown,...

Texas Instruments bq25171-Q1 Linear Battery Charger is an automotive rated 800mA linear charger for 1-cell and 2-cell Li-Ion, Li-Polymer, and LiFePO4, in addition to 1-cell up to 6-cell NiMH battery applications. The device has a single power output that charges the battery. The system...

MPS' MP17xA series non-isolated offline regulators feature an integrated 700 V MOSFET and offer up to 280 mA output current with improved EMI performance Monolithic Power Systems’ MP17xA series are primary-side regulators that provide accurate constant voltage (CV) regulation...

MPS' MP8770C is a 3 V to 17 V, 8 A, synchronous step-down converter with forced CCM The MP8770C from Monolithic Power Systems is a fully integrated, high-frequency, synchronous rectified step-down switch-mode converter with internal power MOSFETs. The device offers a very compact...

NJR (New Japan Radio) NJG1801BKGC-A Automotive SPDT Switch is intended for Wi-Fi®, BLUETOOTH®, and UWB applications. The NJG1801BKGC-A Switch delivers low insertion loss and high isolation, up to 8.5GHz. The NJR NJG1801BKGC-A Automotive SPDT Switch is packaged in an ESON6-GC wettable...