Category: IoT
Geniatech Unveils a Raspberry Pi-like SBC with StarFive JH7110 RISC-V Processor at edgetech+west2024
Last month in Japan, at the edgetech+west2024, Geniatech introduced their first RISC-V-based single-board computer, designed to meet industrial standards and emulate the form factor and functionality of the popular Raspberry Pi. The Geniatech XPI-7110 leverages the StarFive JH7110...
Continue ReadingLILYGO T-ETH-Elite: An ESP32-S3 Board with Stackable LoRaWAN and Cellular Expansion Modules
LILYGO has introduced the T-ETH-Elite, an ESP32-S3-powered IoT board featuring an Ethernet RJ45 port with Power over Ethernet (PoE) support and a 40-pin GPIO header for stackable shields. This board is designed for building IoT gateways with versatile connectivity options, including...
Continue ReadingNBIOT/LTE-M1 Air Monitor: ESP32-S3-WROOM-1 and SIM7080G with GNSS for Greenhouse Monitoring
The NBIOT/LTE-M1 Air Monitor uses an ESP32-S3-WROOM-1 controller and a SIM7080G module for cellular data transmission. It monitors temperature, humidity, CO2 levels, TVOC, and light intensity. The device is powered by an internal 18650 LiPo battery, charged by a solar panel with MPPT...
Continue ReadingLOLIN S3 Mini Pro V1.0.0 Board is For Your Complex IoT projects
The S3 Mini Pro V1.0.0 by LOLIN is an intriguing addition to the IoT landscape, featuring the powerful ESP32-S3FH4R2 chip. A versatile tool with Wi-Fi, a clear TFT display, and an IMU sensor in a compact form factor, this board is intended to enhance IoT networks’ performance. S3...
Continue ReadingMYIR Introduces Nuvoton NuMicro MA35D1-based SOM for Advanced Edge IIoT Gateways
MYIR has unveiled the MYC-LMA35 System-On-Module (SOM), featuring the Nuvoton NuMicro MA35D1 processor (the MA35D16A887Cvariant). This advanced processor boasts dual 64-bit Arm Cortex-A35 cores capable of reaching speeds of up to 800 MHz, along with an additional 180 MHz Arm Cortex-M4...
Continue ReadingMakerfabs ESP32-S3 Based NBIOT/LTE-M Air Monitor with Solar Charging is Designed for Remote Environmental Monitoring
Macakerfabs has recently introduced an Air Monitor with NBIOT and LTE-M named NBIOT/LTE-M Air Monitor, the module uses an ESP32-S3 with SIM7080G for remote environmental monitoring. The device can measure environmental parameters like temperature, humidity, CO2, TVOC, and light...
Continue ReadingOBJEX Link S3LW IoT development board Includes Wi-Fi, Bluetooth, and LoRa Connectivity
The OBJEX Link S3LW is an IoT development board built for battery-powered operations. The board features a custom S3LW system-on-module (SoM) built around the ESP32-S3 MCU. The board supports Wi-Fi, Bluetooth 5, LoRa, and LoRaWAN communication protocols and features 33 GPIOs, I2C, I2S,...
Continue ReadingWindows 11 IoT Enterprise 2024 LTSC Now Available for Embedded and IoT Devices
Windows 11 IoT Enterprise 2024 LTSC is a new operating system for embedded and IoT devices. It offers enhanced features like Wi-Fi 6/7 and USB 4 support, along with advanced security and device management capabilities. Microsoft provides two update models, CBB/GAC and LTSC, for...
Continue Reading