Category: LCD/OLED/ePaper

Tianma Europe’s TM033XDHG01 display module has been designed for use in applications such as thermometers, manometers where analogue displays are traditionally used. With its high display brightness of 600 cd/m 2, a contrast ratio of 1:800 and a large colour space of 16.7 million...

For the first time, ELECTRONIC ASSEMBLY presents the EA PLUGL128, a touch-sensitive OLED display that can be addressed directly via USB. It offers a resolution of 128 × 64 pixels with a 2.9″ screen diagonal. Since OLED technology enables each pixel to act as an independent light...

The AM437x Starter Kit provides a stable and affordable platform to quickly start evaluation of Sitara™ ARM® Cortex®-A9 AM437x Processors (AM4376, AM4378) and accelerate development for HMI, industrial and networking applications. It is a low-cost development platform based on...

MYIR launches a 7-inch HMI display panel with capacitive touch screen, the MYD-Y6ULX-CHMI, which runs Linux on NXP’s i.MX6 ULL ARM Cortex-A7 processor, is specially designed for HMI system like POS, Intelligent access control and more other applications. The MYD-Y6ULX-CHMI Display...

This is a weather station based on an ATtiny85 and an Adafruit Bosch BME280 sensor breakout. It displays the atmospheric temperature, pressure, and humidity on a 96x64 SD1331 colour OLED display. by David Johnson-Davies: To display the readings the Weather Station uses a low-cost 96x64...

This project is a dashboard for displaying the outputs from up to four different sensors or Internet of Things devices. It's based on an ATtiny85 driving an SPI 96x64 SD1331 colour OLED display. by David Johnson-Davies: You can include any widgets from a selection of different types,...

David Johnson-Davies published a new project. It is a library for SD1331 OLED display module that can even run on ATtiny85 mcu. This is a small color graphics library for an SPI 96x64 colour OLED display based on an SD1331. It allows you to plot points, lines, filled and open...

Add exciting new dimensions to your project with this large full-color display. All you need to do is power your LattePanda single board computer and you have a visual user interface for your project – no extra power cables required! The border of the display is insulated with black...