Category: LCD/OLED/ePaper

ELECTRONIC ASSEMBLY TFT009-81AINN LCD Color Display is a high-resolution graphic display that is available in color and black and white. The IPS technology provides a full viewing angle with All-Angle Color Stability Management (AACS) and the color remains the same by varying viewing...

Sunlight readable display may not be a new concept for most developers working on the Raspberry Pi single-board computers. For those who do not know how it works, then as the name suggests, a sunlight-readable display operates in direct sunlight or harsh light conditions. Those working...

This impressive IPS display is 11.9" wide with 170° viewing angles and a capacitive 5-point touch display - great for all kinds of interesting projects displaying lots of data! The display has a 320x1480 resolution and supports generic HDMI inputs, meaning you can use this with...

E-paper or e-ink displays mimic the appearance of ink on paper, making it suitable for reading. These displays provide a wider viewing angle, and the e-paper display is easily visible in direct sunlight without the image appearing to fade. Most e-paper displays today are based on ESP32...

The Liquid Crystal Displays (LCDs) are a type of flat panel display that uses liquid crystals for operation. They are relatively old technology but can be seen in clocks, laptops, computers, calculators, dashboards, and other electronic projects and devices because of their advantages...

Industrial LCD manufacturer KOE (Kaohsiung Opto-Electronics) has announced the introduction of a new high-performance 6.2-inch TFT display module. The TX16D206VM0BAA TFT display features HVGA resolution (640 x 240 pixels), a wide 8:3 aspect ratio, and IPS (in-plane switching)...

Nixie tube is an electronic device for displaying numerals or other information using glow discharge. When a voltage is applied between two electrodes in a glass tube containing low-pressure gas, the flow of electric current through the gas makes plasma. This phenomenon is called glow...

Seeed Studio 1.3inch OLED Display Module is for the Raspberry Pi Pico, has 64×128 Pixels, and an SPI/I2C Interface. The 1.3" OLED Display Module has an embedded SH1107 driver and uses the SPI/I2C Bus. It comes with a Raspberry Pi Pico C/C++ and MicroPython Demo. Features Adopts...