Category: Mcu

Piconomix, the South-Africa based Embedded systems development company, has launched a campaign on Crowdsupply for a new board called; PX-Hero. The PX-Her0 is a low-power ARM Cortex MO+ based development board that was developed for use in embedded education applications. The board comes...

One of the major barriers to developing industrial applications is usually the complexity and cost of the development/prototyping platforms. A lot of SOMs, SOCs and board manufacturers, including ADLINK, have taken stabs at this problem with different solutions. Leveraging on the...

Kevin’s CircuitBrains boards are now listed and live on circuitpython.org/downloads. Kevin submitted the Deluxe model to Crowd Supply will have a project to support fabrication and fulfillment soon – Twitter. [via] CircuitBrains Basic CircuitPython on an ARM Cortex M0 in 1 square...

The STM32L5 microcontroller series is the solution and provides a new optimal balance between performance, power, and security Security has emerged as one of the 3 key areas that developers of embedded and IoT applications are thriving to improve. The STM32L5 microcontroller series...

If you’d like to return to a time when your computer had very accessible components, a microprocessor, RAM, ROM, and I/O chips all hanging from an exposed bus, you can do so by building your very own BASIC color microcomputer with the CB2 micro kit in under 30 minutes for as low as...

STMicroelectronics is making design starts using 8-bit STM8 microcontrollers (MCUs) faster, more affordable, and more accessible for creative minds of all types by introducing new development boards in the easy-to-use Nucleo-32 form factor. The compact boards are controlled and powered...

The STM32Fo30 is one of the most popular microcontrollers in the STM32 family. It's relative low-power specification and high-resolution ADCs fetched it good followership among designers, as such, it was quite interesting to hear that Czechia-based electronics specialist and Tindie user,...

An Open Source SAMD21 Development Board by sirmylesavery @ hackaday.io This project started after my first introduction to PCB design at my 2019 summer internship. At that internship, I designed a board that used a SAMD21 to control a GPS and LoRa module. This was my first introduction...