PICKit 3 Mini
Mcu

PICKit 3 Mini

Reviahh has published a new project, the PICKit 3 Mini: Previously, I made a Pickit 3 clone – (see previous blog post). It works well, but I have often wondered just how little of its circuitry was needed to program and debug the boards I make. For instance – I primarily use the...

Continue Reading
4.580
Views
0 Comments
DSETA board with an AT89C51ED2
Mcu

DSETA board with an AT89C51ED2

Jesus Echavarria tipped us with his latest DSETA board with an AT89C51ED2. Some months ago I review the DSETA board due the obsolescence of the microcontroller. I use this board in some projects succesfully. But when I try to manufacture a batch of this boards, I found that the...

Continue Reading
6.866
Views
0 Comments
20 PIN PIC Development Board
Mcu

20 PIN PIC Development Board

Small size multipurpose 20 Pin PIC Micro-Controller development board, includes onboard 5V regulator, prototyping area and ICSP programing port. The board provided with few more components which includes 4 optocoupler, 2 LEDs connected to RA5, RC7 with series resistors, 2 tactile...

Continue Reading
6.211
Views
0 Comments
MaxProLogic: Ultra Low Cost FPGA Development Board
Mcu

MaxProLogic: Ultra Low Cost FPGA Development Board

The MaxProLogic is the perfect FPGA project board for the student and hobbyist. The MaxProLogic is an FPGA development board that is designed to be user friendly and a great introduction into digital design for anyone. The core of the MaxProLogic is the Altera MAX10 FPGA. This powerful...

Continue Reading
5.825
Views
0 Comments
LoFive – Tiny RISC-V Microcontroller Board
Mcu

LoFive – Tiny RISC-V Microcontroller Board

Small breadboard friendly development board using the SiFive FE310 RISC-V Microcontroller. MCU – SiFive Freedom E310 (FE310) 32-bit RV32IMAC processor @ up to 320+ MHz (1.61 DMIPS/MHz) Storage - 128-Mbit SPI flash (ISSI IS25LP128) Expansion - 2x 14-pin headers with JTAG,...

Continue Reading
7.076
Views
0 Comments
Alzheimer’s Wearable Assistant
Mcu

Alzheimer’s Wearable Assistant

A smartwatch with fall and location detection, reminders and more, designed to help you or your loved one with Alzheimer's! When I saw Infineon’s Sensor Hub Nano, it appeared to be a good candidate in such a project, because of its very small size and BLE capabilities. With the...

Continue Reading
4.000
Views
0 Comments
ESP32 NTP OLED clock
LCD/OLED/ePaperMcu

ESP32 NTP OLED clock

danman @ blog.danman.eu build a OLED display NTP clock and document his process on his blog: As a first project with my new ESP32 module with OLED display I chose to build OLED clock. I thought I’ll just find some existing code, upload it and it’s done. There are a few such...

Continue Reading
7.967
Views
0 Comments
4chord MIDI Plays All the Hits
LCD/OLED/ePaperMcu

4chord MIDI Plays All the Hits

4chord MIDI - the USB MIDI keyboard to play every major hit pop song with four little buttons. by Sven Gregori: 4chord MIDI - the USB MIDI keyboard dedicated to play all the four chord songs, from Adele via Green Day and Red Hot Chilli Peppers to U2 and Weezer. Thanks to MIDI, you can...

Continue Reading
3.956
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives