Category: Mcu
![40 Pin & 28 Pin dsPIC Development Board 40 Pin & 28 Pin dsPIC Development Board](https://www.electronics-lab.com/wp-content/uploads/2016/10/40-Pin-28-Pin-dsPIC-Development-Board-PIC1.jpg)
40 Pin & 28 Pin dsPIC Development Board
The dsPIC Development board has been designed mainly for Motor dsPIC30F4011 Digital Signal Controller in the 40-pin motor control socket and dsPIC30F4012 28 Pin digital signal controller, the board can also be used with other dsPIC ICs. Board provided with 3.3V and 5V regulator, crystal...
Continue Reading![18 PIN PIC Development Board with Header IO 18 PIN PIC Development Board with Header IO](https://www.electronics-lab.com/wp-content/uploads/2016/10/18PIN-PIC-DEVELOPMENT-BOARD-IMG2.jpg)
18 PIN PIC Development Board with Header IO
PIC16F 18-pin Development Board will help you with your prototyping. It works with any of Microchip’s 18 pin of 16F PIC microcontroller. Features All ports terminating in separate box header with 5 VDC source option ICSP connector for programming for the PIC’s with...
Continue Reading![PIC16F 28-pin Development Board with LCD PIC16F 28-pin Development Board with LCD](https://www.electronics-lab.com/wp-content/uploads/2016/10/PIC16F-28-PIN-PIC-DEVELOPMENT-BOARD-WITH-LCD-IMG2.jpg)
PIC16F 28-pin Development Board with LCD
This development board offers various important add-ons which we considered are important to a developer of Microcontroller based project from Microchip. Features This board can be used with any of the 16F / 28 Pin PIC ICs compatible with 16F73 MCU. This kit is supplied with a...
Continue Reading![Tibbo Project System-based Aircon Controller Application Tibbo Project System-based Aircon Controller Application](https://www.electronics-lab.com/wp-content/uploads/2016/10/1.jpg)
Tibbo Project System-based Aircon Controller Application
The app allows you to manage traditional air conditioners that are controlled through infrared remotes. Designed for the office environment, the app relies on the ambient brightness (measured by Tibbit #28) to determine whether the aircon should be running or not. In the office setting,...
Continue Reading![8 Channel RS485 Relay Board 8 Channel RS485 Relay Board](https://www.electronics-lab.com/wp-content/uploads/2016/10/8-CHANNEL-RS485-DRIVEN-RELAY-BOARD-IMG.jpg)
8 Channel RS485 Relay Board
This project helps you control 8 relays using RS485 link with the help of a PC. This kit can effectively convert a standard PC to a powerful PLC ( programmable logic controller ). At the PC end , you will need to use our RS232 to RS485 Interface – C020 or any other suitable...
Continue Reading![MyComm: A portable satellite messaging system MyComm: A portable satellite messaging system](https://www.electronics-lab.com/wp-content/uploads/2016/10/5612271463752619358.jpg)
MyComm: A portable satellite messaging system
Never before have we been so incredibly connected to one another than today; thanks to the prevalence of internet and mobile data networks. But the dimension of this connected world is finite and ends not far beyond the outermost cell phone tower. John Grant wanted to be connected to his...
Continue Reading![WiLoader : The WiFi Programmer for Arduino & AVR WiLoader : The WiFi Programmer for Arduino & AVR](https://www.electronics-lab.com/wp-content/uploads/2016/10/88fc4c2107d9c5238a22606cadf1fed0_original-e1475581606312.png)
WiLoader : The WiFi Programmer for Arduino & AVR
The new generation of programmers that use WiFi instead of cables. Program, control and monitor Robots, AVR and Arduino over WiFi. Have you ever thought of programming wirelessly ? WiLoader is the answer. But HOW ???? WiLoader easily connects to your WiFi network, then you can...
Continue Reading![Chronio – Low power Arduino based (smart)watch Chronio – Low power Arduino based (smart)watch](https://www.electronics-lab.com/wp-content/uploads/2016/09/chronio.png)
Chronio – Low power Arduino based (smart)watch
Max.K @ hackaday.io designed his own impressive watch based on Atmega328p with Arduino bootloader, Maxim DS3231 (<2min per year deviation), 96x96 pixel Sharp Memory LCD (LS013B4DN04) and it's powered by a CR2025 160mAh coin cell battery. Chronio is an Arduino-based 3D-printed...
Continue Reading