Category: Top Stories
![Implementing the 100 MHz 6502 In an FPGA Implementing the 100 MHz 6502 In an FPGA](https://www.electronics-lab.com/wp-content/uploads/2023/01/jpg-1024x576.jpg)
Implementing the 100 MHz 6502 In an FPGA
Jürgen Mülle has posted details of re-implementing the 65C02 in an FPGA, in a pin-compatible format that enables you to upgrade old computers and games to a 100 MHz clock rate! Speaking about the project, Jürgen says: "The idea of implementing a CPU core inside an FPGA is not new,...
Continue Reading![LinkStar-H68K – The Mini Computer Positioned as a Router LinkStar-H68K – The Mini Computer Positioned as a Router](https://www.electronics-lab.com/wp-content/uploads/2022/12/LinkStar-H68K-720x442-1.webp)
LinkStar-H68K – The Mini Computer Positioned as a Router
Introduction IoT hardware specialist, Seeed Studio, recently released a very impressive 'Router' (more than a router actually) and we'll like to take an intensive look at it. So for this article, we will be reviewing the LinkStar-H68K multimedia router and discussing the features that...
Continue Reading![Launching MKR IoT Carrier Rev2 board with a Bosch SensorTech BME688 Launching MKR IoT Carrier Rev2 board with a Bosch SensorTech BME688](https://www.electronics-lab.com/wp-content/uploads/2023/01/MKR-IoT-Carrier-rev2-featured-1024x768.jpg)
Launching MKR IoT Carrier Rev2 board with a Bosch SensorTech BME688
The Bosch SensorTech BME688 4-in-1 pressure, humidity, temperature, and gas sensor has replaced the HTS221 humidity sensor and the LP22HB barometric pressure sensor on the MKR IoT Carrier Rev2 board for Arduino MKR boards, and the LSM6DSOX has been replaced the LSM6DS3. The Arduino MKR...
Continue Reading![Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython](https://www.electronics-lab.com/wp-content/uploads/2023/01/Maker-Feather-AIOT-S3.jpg)
Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython
The Cytron Maker Feather AIoT S3 is an ESP32-S3 board that fits the Adafruit Feather form factor. It is good for makers and STEM education because it has LEDs for GPIOs, a buzzer, expansion headers and connectors, and support for CircuitPython and Arduino. The WiFi and Bluetooth LE IoT...
Continue Reading![Feature Loaded New Camera Modules from Raspberry Pi Feature Loaded New Camera Modules from Raspberry Pi](https://www.electronics-lab.com/wp-content/uploads/2023/01/documentation-1024x683.webp)
Feature Loaded New Camera Modules from Raspberry Pi
The Sony IMX708 12MP sensor-based camera modules with HDR and autofocus were just released in four different variations by Raspberry Pi. To target various applications, the new Camera Module 3 is also offered in Wide and NoIR variants. A 12MP stacked CMOS Sony IMX708 sensor is featured...
Continue Reading![Top 10 IoT development boards of 2022 Top 10 IoT development boards of 2022](https://www.electronics-lab.com/wp-content/uploads/2023/01/raspberry-pi-4-labelled@2x-1c8c2d74ade597b9c9c7e9e2fff16dd4-1024x610.png)
Top 10 IoT development boards of 2022
Engineers and makers can use and test new technologies for IoT projects quickly using development boards. The best SBCs are those that can be used for any project, including Internet of Things (IoT) projects. This means that a powerful board with the fastest technology might not be the...
Continue Reading![Waveshare module features a 6-axis IMU and a 1.28-inch IPS Display Waveshare module features a 6-axis IMU and a 1.28-inch IPS Display](https://www.electronics-lab.com/wp-content/uploads/2022/12/waveshare-rp2040-1-28-ips-lcd-board-with-accelerometer-gyroscope-waveshare-wav-22668-39993805275331_1000x.jpg)
Waveshare module features a 6-axis IMU and a 1.28-inch IPS Display
Waveshare developed the RP2040-LCD-1.28, which is an MCU board that combines a good price with a nice performance. The fact that it has a 1.28-inch LCD round display, a Li-ion battery charger, a 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, in addition to...
Continue Reading![Introducting a high-senstitive 24GHz mmWave Sensor Human Static Presence Module Lite for Home Assistance Introducting a high-senstitive 24GHz mmWave Sensor Human Static Presence Module Lite for Home Assistance](https://www.electronics-lab.com/wp-content/uploads/2022/12/1-101991030-24ghz-mmwave-sensor-45font-e1671964136688.jpg)
Introducting a high-senstitive 24GHz mmWave Sensor Human Static Presence Module Lite for Home Assistance
The 24GHz mmWave Human Static Presence Module Lite is a high-sensitivity mm-wave radar sensor with an integrated antenna that works on the FMCW principle. It is easy to use because it has tools for visual debugging and setting up. It can easily adapt to different situations because many...
Continue Reading