Pimoroni Pico LiPo board is suitable for Portable Applications
Raspberry PiTop Stories

Pimoroni Pico LiPo board is suitable for Portable Applications

Pimoroni Pico LiPo, powered by the RP2040 microcontroller, comes with 16MB of flash storage, USB-C port, Stemma QT/Qwiic connector, and built-in LiPo charging capability. It enhances the functionality of the Pico and ensures compatibility with existing Raspberry Pi Pico...

Continue Reading
2.038
Views
0 Comments
E-PEAS New Buck-Boost ICs enables Highly Efficient Energy Harvesting from Solar & Vibrational Sources
ICTop Stories

E-PEAS New Buck-Boost ICs enables Highly Efficient Energy Harvesting from Solar & Vibrational Sources

Expanding its portfolio of advanced power management ICs (PMICs) for energy harvesting applications, e-peas has announced two new devices capable of further pushing the performance envelope. The RF AEM30330, Vibration AEM30330 and solar AEM10330 PMICs both utilize a buck-boost...

Continue Reading
2.077
Views
0 Comments
Seeed Studio introduces SSD202 SoC powered ultra-small system on module
SBCTop Stories

Seeed Studio introduces SSD202 SoC powered ultra-small system on module

We have already seen several modules coming to the market by Seeed Studio that was based on the SSD202 SoC, which integrated Arm Cortex-A7 processor core running at a clock frequency of up to 1.2GHz. Since this SoC is widely used in smart display applications, Seeed Studio has...

Continue Reading
2.692
Views
0 Comments
HaneSOM: the most compact Linux computer module
IoTMcuTop Stories

HaneSOM: the most compact Linux computer module

Linux capable IoT boards are considered a better option over embedded C boards by many makers and hackers due to rapid prototyping. One can build a lot of IoT projects effortlessly on Linux-based boards within minutes. IoT-specific boards that run Linux are, however, costlier and...

Continue Reading
3.110
Views
0 Comments
Miniature Buck Converter Delivers 4A
ICTop Stories

Miniature Buck Converter Delivers 4A

RECOM announces the RPX-4.0 cost-effective buck converter in a QFN package. RECOM has added a 4A option to its RPX series of miniature buck converters. The RPX-4.0 is rated to 3.8 to 36V input and programmable 1 to 7V output at 4A. With a compact 5mm x 5.5mm footprint and low 4.1mm...

Continue Reading
1.843
Views
0 Comments
NCH6300HV high voltage DC-DC power booster for nixie displays
High VoltageTop Stories

NCH6300HV high voltage DC-DC power booster for nixie displays

Nixie tube is an electronic device for displaying numerals or other information using glow discharge. A potential difference is applied between two electrodes in a glass tube containing low-pressure gas. The flow of electric current through the gas makes plasma. This phenomenon is...

Continue Reading
2.732
Views
0 Comments
Raspberry Pi’s RP2040 Chip Now Available for $1
McuRaspberry PiTop Stories

Raspberry Pi’s RP2040 Chip Now Available for $1

Coming at a time when the global chip shortage is crippling productions across the world, Raspberry Pi Foundation CEO Eben Upton, today shared the news, which will no doubt gladden the heart of many, that the chip at the heart of the Raspberry Pi Pico development board; the RP2040, is...

Continue Reading
2.370
Views
0 Comments
Inkplate 6PLUS: Verstaile, easy-to-use and energy-efficient Wi-Fi enabled 6-inch e-paper display
LCD/OLED/ePaperTop Stories

Inkplate 6PLUS: Verstaile, easy-to-use and energy-efficient Wi-Fi enabled 6-inch e-paper display

E-paper displays are fascinating. They mimic the appearance of ordinary ink on paper, and they look brilliant! E-Paper displays make reading comfortable and provide a wider viewing angle than most light-emitting displays. An idle E-Paper display can be easily viewed in direct sunlight...

Continue Reading
2.125
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives