Category: Top Stories
![Toybrick TB-RK3588SD: A Rockchip RK3588S-Based SBC in Raspberry Pi Form Factor Toybrick TB-RK3588SD: A Rockchip RK3588S-Based SBC in Raspberry Pi Form Factor](https://www.electronics-lab.com/wp-content/uploads/2024/02/TB-RK3588SD-top.webp)
Toybrick TB-RK3588SD: A Rockchip RK3588S-Based SBC in Raspberry Pi Form Factor
The Toybrick TB-RK3588SD is a single-board computer(SBC) powered by the Rockchip RK3588S, equipped with 8GB LPDDR4X RAM and a dual-core GPU and NPU for AI. It's designed for multimedia applications in AI, VR, and cloud computing, all while maintaining a similar form factor to a...
Continue Reading![Waveshare’s New ESP32-S3 Boards with 4G, Wi-Fi, Bluetooth, and Camera Support Waveshare’s New ESP32-S3 Boards with 4G, Wi-Fi, Bluetooth, and Camera Support](https://www.electronics-lab.com/wp-content/uploads/2024/02/esp32-s3-sim7670g-4g-1-e1707910826929.jpg)
Waveshare’s New ESP32-S3 Boards with 4G, Wi-Fi, Bluetooth, and Camera Support
Waveshare has launched two new ESP32-S3 modules: the ESP32-S3-SIM7670G-4G and the ESP32-S3-A7670E-4G. Both support 4G, GNSS, Wi-Fi, Bluetooth, and solar charging, and have a holder to put in an 18650 battery. The main difference is in their cell network support. The SIM7670G model works...
Continue Reading![ASUS Mini PC PL64 – Ultra-Slim, Fanless Design with 12th Gen CPU, WiFi 6E, and Support for Triple 4K Displays ASUS Mini PC PL64 – Ultra-Slim, Fanless Design with 12th Gen CPU, WiFi 6E, and Support for Triple 4K Displays](https://www.electronics-lab.com/wp-content/uploads/2024/02/kv_main.067f92a0.png)
ASUS Mini PC PL64 – Ultra-Slim, Fanless Design with 12th Gen CPU, WiFi 6E, and Support for Triple 4K Displays
The ASUS Mini PC PL64 is a 12th Gen Intel Core processor-based fanless mini PC with up to 64GB DDR4 memory and dual PCIe 4.0 SSDs. Key features include dual COM and LAN ports, triple 4K HDMI display support, and Wi-Fi 6E connectivity. The device is available in three versions:...
Continue Reading![Milk-V Duo 256M is an SG2002-Powered Multi-Architecture SBC Priced at $7.99 Milk-V Duo 256M is an SG2002-Powered Multi-Architecture SBC Priced at $7.99](https://www.electronics-lab.com/wp-content/uploads/2024/02/Duo-256M-SBC.webp-1024x523.jpg)
Milk-V Duo 256M is an SG2002-Powered Multi-Architecture SBC Priced at $7.99
The Milk-V Duo 256M is a compact board powered by the SOPHGO SG2002 SoC, integrating multiple architectures including Arm, RISC-V, and 8051. It has 256MB of built-in RAM and a 1 TOPS neural processing unit (NPU) for advanced computations. For storage, it features a microSD card slot....
Continue Reading![Vivid Unit – An RK3399-Based SBC with a Built-In Touchscreen Display Vivid Unit – An RK3399-Based SBC with a Built-In Touchscreen Display](https://www.electronics-lab.com/wp-content/uploads/2024/02/02-e1707980761458.jpg)
Vivid Unit – An RK3399-Based SBC with a Built-In Touchscreen Display
The Vivid Unit is an RK3399-based Single Board Computer (SBC) featuring a 5.5-inch touchscreen display, 4GB LPDDR4 RAM, and 32GB eMMC storage along with Ethernet, Wi-Fi (802.11b/g/n), and Bluetooth 4.1, USB 3.1 Gen1, HDMI, and a 40-pin GPIO harder. They were designed for smart home...
Continue Reading![LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA](https://www.electronics-lab.com/wp-content/uploads/2024/02/LILYGO-T-FPGA-ESP32-S3-Development-Board-M-2-Slot-FPGA-GW1NSR-LV4CQN48PC6-I5-low-power.jpg_-e1707530742928.webp)
LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA
The LILYGO T-FPGA development kit consists of two components: an M.2 module and a carrier board. The M.2 module features an ESP32-S3 SoC and Gowin GW1NSR-4C FPGA with 4,608 LUTs along with USB-C OTG for ESP32-S3, a USB-C port for FPGA, four Pmod interfaces, a STEMMA Qt/Qwiic connector,...
Continue Reading![52Pi NVMe HATs for Pi 5 will Support 2230, 2242, 2260, and 2280 Sizes SSDs 52Pi NVMe HATs for Pi 5 will Support 2230, 2242, 2260, and 2280 Sizes SSDs](https://www.electronics-lab.com/wp-content/uploads/2024/02/52Pi-N04-and-N05-HATs-for-Raspberry-Pi-5-1024x372.jpg)
52Pi NVMe HATs for Pi 5 will Support 2230, 2242, 2260, and 2280 Sizes SSDs
52Pi recently launched two NVMe M.2 SSD HATs for the Raspberry Pi 5, called N04 and N05. It supports a range of NVMe SSDs like 2230, 2242, 2260, and 2280, with Gen 3 speeds. Additional features include cooling vents, slots for display/camera cables, and a gold-plated PCB for better...
Continue Reading![Raspberry Pi 5 Now Supports Two SSDs with Geekworm X1004 HAT+ Raspberry Pi 5 Now Supports Two SSDs with Geekworm X1004 HAT+](https://www.electronics-lab.com/wp-content/uploads/2024/02/Geekworm-X1004-Dual-2280-NVMe-SSD-shield-for-Raspberry-Pi-5-NOT-Support-BOOT-from-NVME.jpg_-e1707188656354-1024x728.webp)
Raspberry Pi 5 Now Supports Two SSDs with Geekworm X1004 HAT+
The Geekworm X1004 HAT+ for the Raspberry Pi 5 supports two SSDs, allowing for a total storage capacity of up to 8TB. It enables quick data transfer speeds—up to 5 Gbps using PCIe 2.0 and up to 8 Gbps with PCIe 3.0. Previously, we have seen many companies build NVMe HATs for the Pi5...
Continue Reading