login
This is the image preview of the following page:
DIY electronic RFID Door Lock with Battery Backup
Elmue build a RFID electronic door lock using PN532 Controller, Vehicle Battery and Teensy 3.2 board. The advantage of an electronic door lock is that the above security issues do not apply. It is much better to have a safe door lock which prevents that the thief can enter than to have an ala... Read More
Image Downloads:
- full (700x685)
- thumbnail (150x150)
- medium (300x294)
- medium_large (640x626)
- large (640x626)
- 1536x1536 (700x685)
- 2048x2048 (700x685)
- re_large (700x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x24)
- menu-36x36 (36x36)
- menu-48x48 (48x48)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x587)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x147)
RELATED POSTS
26 March, 2018 OpenEmbed Releases em3399 Rockchip RK3399 SoM plus an Evaluation Kit
21 April, 2020 Renesas RX66N and RX72N MCU families
26 July, 2019 WellPCB Published a Guide on “PCB Gold Finger Then, Now & In The Future”
11 May, 2017 CP2615 USB-I2S Bridge – A New Solution from Silicon Labs
29 May, 2018 Arduino Unveils its First FPGA Board with MKR Vidor 4000, and an updated Uno WiFi Board
31 March, 2016 A biometric sensor for wearables – LG Innotek
