login
This is the image preview of the following page:
INA219 current sensor DIY Breakout board
Juan Ignacio has designed a INA219 current sensor DIY Breakout board: Another small board, this time for a INA219. The INA219 is a high-side current shunt and power monitor with an I2C interface. For testing I used Rei VILO library with a MSP430G2553 and Energia, and I measured the power consu... Read More
Image Downloads:
- full (600x450)
- thumbnail (150x150)
- medium (300x225)
- medium_large (600x450)
- large (600x450)
- 1536x1536 (600x450)
- 2048x2048 (600x450)
- re_large (600x450)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- menu-24x24 (24x18)
- menu-36x36 (36x27)
- menu-48x48 (48x36)
- crp_thumbnail (292x236)
- sendpress-max (600x450)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x450)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x113)
RELATED POSTS
19 June, 2022 Enhancing the development of IoT applications using the U-Blox XPLR-IOT-1 kit
25 April, 2018 BML GPIO-14 USB Board for PCs
21 April, 2021 Piezo contact microphone picks up voice through bone
10 March, 2016 4A Bipolar Stepper Motor Driver Based on LV8727E
23 January, 2022 DC-HV DC Converter – 200V @ 20mA Output with 12V DC Input
30 November, 2020 GPS/GNSS eRideOPUS 7 Modules
