![LOLIN S3 Mini Pro V1.0.0 Board is For Your Complex IoT projects LOLIN S3 Mini Pro V1.0.0 Board is For Your Complex IoT projects](https://www.electronics-lab.com/wp-content/uploads/2024/08/S3-MINI-PRO-—-WEMOS-documentation.jpg)
The S3 Mini Pro V1.0.0 by LOLIN is an intriguing addition to the IoT landscape, featuring the powerful ESP32-S3FH4R2 chip. A versatile tool with Wi-Fi, a clear TFT display, and an IMU sensor in a compact form factor, this board is intended to enhance IoT networks’ performance.
S3 Mini Pro V1.0.0: Product Overview and Specifications
The LOLIN ESP32-S3FH4R2 is a flexible chip for many uses. It offers strong Wi-Fi and Bluetooth LE for good wireless connections. It has two processors for great performance and energy saving. With 4MB Flash and 2MB PSRAM. These features facilitate the development of security systems, automated lighting, and air quality monitoring systems.
The board comes with a 0.85” 128×128 LCD TFT display, run by the GC9107 or GC9A01. The 6D MEMS IMU (QMI8658C) improves motion tracking, quite useful in fitness devices. This onboard Inertial Measurement Unit (IMU) is essential for wearable devices, enabling precise tracking of physical activities and health metrics. It features the standard 12 IO pins for various uses, three buttons for interaction, and an RGB LED. It also has an IR sensor and supports ADC, DAC, I2C, SPI, UART, and USB OTG interfaces. (Refer to the diagram below )
The LOLIN S3 Mini Pro V1.0.0 supports both MicroPython, Arduino, and ESP-IDF. The board runs on MicroPython by default, but the software support can be switched to either Arduino or ESP-IDF if needed.
S3 Mini Pro V1.0.0 and other boards
The board can be used in predictive maintenance systems to forecast equipment failures and in smart manufacturing setups for critical real-time data processing. The S3 Mini Pro stands out due to its dual-core processors, integrated TFT display, and IMU, which enhance its versatility. Compared to the popular Raspberry Pi Pico, the S3 Mini Pro offers superior wireless capabilities, including Wi-Fi and Bluetooth, along with advanced sensors. This makes it more suitable for complex IoT projects. Although Arduino boards like the Uno are user-friendly, the S3 Mini Pro provides greater computational power and a richer feature set, making it a more robust solution for advanced IoT tasks.
The S3 Mini Pro V1.0.0 by LOLIN is powered by ESP32-S3FH4R2 chip with dual cores, Wi-Fi, Bluetooth, a colorful display, and an IMU sensor. The board is compact yet powerful, suitable for simple or complex IoT projects.
For more details, you can refer Datasheet or visit the Official website or relevant forums. The S3 Mini Pro V1.0.0 is available on AliExpress online.