Expansion Shield – Breakout Board for Arduino Nano

Expansion Shield – Breakout Board for Arduino Nano

If you need to interface many devices and sensors to Arduino Nano, then, this project is for you. This is a Nano expansion I/O shield (breakout board) for the Arduino Nano. The board facilitates the easy connection between Arduino Nano and other devices.  Each Arduino (I/O) Pin including...

Continue Reading
1.024
Views
0 Comments
An affordable SDI signal generator using Arduino MKR Vidor 4000
ArduinoFPGA

An affordable SDI signal generator using Arduino MKR Vidor 4000

Transmission of video from one location to another in the professional video world is typically done via SDI (Serial Digital Interface). This FPGA-powered device, intended as a test tool for SDI circuits, pushes signals at 1.485 Gbps. Based on an Arduino MKR Vidor 4000, Chris Brown of...

Continue Reading
1.317
Views
0 Comments
Translating “Dah” and “Dit” Speech Into Morse Code with an CWVox using Arduino
Arduino

Translating “Dah” and “Dit” Speech Into Morse Code with an CWVox using Arduino

image: CWvox Prototype connected to the radio (Source: Kevin Loughin) These days, it seems like every speech-detection-related project is based on some kind of advanced algorithm, such as machine learning, pattern matching, or spectrum analysis. But Kevin Loughin (AKA KB9RLW), an...

Continue Reading
1.167
Views
0 Comments
2.7A PWM Valve/Solenoid Driver Arduino Nano Shield

2.7A PWM Valve/Solenoid Driver Arduino Nano Shield

This Arduino shield helps to drive various loads like a solenoid, valve, motor, inductive actuator, heater, and bulb. A wide supply range 8V-60V and a load current of 2.7A allows it to be used with a variety of actuators. The board can be used as a stand-alone driver or it can be...

Continue Reading
1.024
Views
0 Comments
Arduino 2-Digit 0.5″ Common Cathode 7 Segment Display Module

Arduino 2-Digit 0.5″ Common Cathode 7 Segment Display Module

This is an Arduino-compatible board for creating 2 Digit Display projects. The circuit operates with 5V DC, Connector CN1 is provided for bootloader programming and Arduino firmware upload. A new Atmega328 chip requires a bootloader and Arduino firmware programming, Connector CN1 helps...

Continue Reading
1.024
Views
0 Comments
Learn how! Robotic ultraArm P340 by Arduino sketches, engraves, and grabs
Robots

Learn how! Robotic ultraArm P340 by Arduino sketches, engraves, and grabs

The Elephant Robotics ultraArm P340 is a robot arm that has a working radius of 340 mm and is controlled by an Arduino-compatible ATMega2560 control board. The arm of this robot may be outfitted with a variety of accessories that can be used for painting, laser engraving, or grabbing...

Continue Reading
1.197
Views
0 Comments
Step-Up Your Projects with Arduino MKR IoT Carrier Rev2 featuring 4-in-1 Bosch BME688 Sensor
Arduino

Step-Up Your Projects with Arduino MKR IoT Carrier Rev2 featuring 4-in-1 Bosch BME688 Sensor

Arduino has launched a second version of their Arduino MKR family which features a range of sensors. The Arduino MKR IoT Carrier Rev2 is designed for Internet of Things projects. It provides a range of connectivity options, including Wi-Fi, cellular, and LoRa, as well as a variety of...

Continue Reading
1.173
Views
0 Comments
Elevate your TinyML Projects with Arduino Nicla Voice Featuring Syntiant NDP120
AIArduinoTop Stories

Elevate your TinyML Projects with Arduino Nicla Voice Featuring Syntiant NDP120

In a world where voice assistants can be activated by just a simple activation voice command line like “Ok Google” or “Alexa”, the importance of vocal input is crucial. Nicla Voice is a development board designed to help developers create and deploy machine learning models on...

Continue Reading
1.206
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives