Search Results for : Arduino IDE

Asset tracking applications have been on the rise and the widely adopted wireless communication technology is LoRaWAN. However, for many tracking applications such as connecting people, tracking vehicles, ships, or packages to relaying sensor data for agriculture, energy, and industrial...

Wemos has unveiled a new development board for the LOLIN family, LOLIN C3 Mini is powered by an Espressif ESP32-C3FH4 Wi-Fi and BLE RISC-V microcontroller. The board follows the company’s earlier versions of WEMOS D1 Mini (ESP8266) and LOLIN S2 Mini (ESP32-S2) form factor and is...

Introduction Author: Aazim Hassan cover photo: depositphotos.com Current loop output sensors are used to transmit data over long distances without dropping the sensor output value. Signal conditioning is performed at the receiving end to analyze and measure the output value....

This project enables the user to create a high current DC-DC converter. The project consists of a high current inductor, high current low voltage 2 x MOSFETs, half-bridge driver LT1158 chip, voltage feedback using onboard R9 and R10 resistor dividers, shunt resistor for overcurrent...

The project presented here is designed for high-voltage and high-speed driving for MOSFETS and IGBTs that operate up to +1200V. The project consists of a FAN73912 gate driver chip and 2 x IGBTs, DC bus capacitors, current sense resistor for current feedback etc. The advanced input...

This project enables the user to create a high current DC-DC converter. The project consists of a high current inductor, high current low voltage 2 x MOSFETs, half-bridge driver LT1158 chip, voltage feedback using onboard R9 and R10 resistor dividers, shunt resistor for overcurrent...

Driving a low current 3 phase brushless Sensorless DC motor is very easy with this project. This Full-wave BLDC driver project is capable to drive low current brushless fan motor without a hall sensor. 180° sinusoidal drive, high torque output, and silent drive are a few key features...

Penk Chen designed a pocket-sized computer with a retro appeal, built from either off-the-shelf parts or 3D-printed structures. Inspired by the retro-style, powered by the Raspberry Pi Zero 2 W, Penkesu is a portable computer with a 7.9-inch widescreen display and a 48-key ortholinear...