AAEON’s MXM-ACMA Pairs Intel Arc Graphics with a Quadruple-Display Interface for Multiscreen Digital Signage Solutions
AISoM-CoM

AAEON’s MXM-ACMA Pairs Intel Arc Graphics with a Quadruple-Display Interface for Multiscreen Digital Signage Solutions

Combining Intel® Arc™ graphics with a quad display interface, AAEON’s new MXM-ACMA is tailor-made for augmenting digital signage, edge AI, and healthcare imaging solutions. AAEON, a leading provider of industrial and embedded computing solutions, has released the MXM-ACMA, a...

Continue Reading
1.049
Views
0 Comments
One Channel RF Remote Relay Switch

One Channel RF Remote Relay Switch

The project described here is one Channel RF remote receiver Relay board. The project is built using LICAL-EDC-DS001 chip from LINX. The board consists of Encoder/Decoder chip, 433Mhz RF Receiver module, 10 x jumpers to set the address, a Relay to drive the output, U2 5V regulator,...

Continue Reading
48 Views0 Comments
AAEON releases RICO-3568 with Pico-ITX Plus Form Factor
SBC

AAEON releases RICO-3568 with Pico-ITX Plus Form Factor

AAEON is now inclining to a slightly wider form factor with its new RICO-3568 based on Rockchip RK3568 Quad-Core Arm® Cortex®-A55 Processor. Adhering to the Pico-ITX Plus form factor which is 100mm x 80mm in dimension, it seems the extra 8mm in its size compared to the array of AAEON...

Continue Reading
1.105
Views
0 Comments
Adafruit CH552 QT Py – A 8051 Powered Dev Board with RGB LED and STEMMA QT
Mcu

Adafruit CH552 QT Py – A 8051 Powered Dev Board with RGB LED and STEMMA QT

Adafruit just announced Adafruit CH552 QT Py and this board ranks in the top part of my weird tech list. The MCU used in this is a WinChipHead (WCH) CH552 has an E8051 Core. with 16 kilobytes of flash memory but only about 1.25 kilobytes of RAM, and the most weird thing about this it...

Continue Reading
1.119
Views
0 Comments
xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features
Laser

xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features

Previously we have written about many laser engravers like the AlgoLaser Delta, ATEZR P20 PLUS, and many similar but all of those laser cutters and engraver has one thing in common, they were designed for a beginner or a hobbyist who just wanted to get started with engraving, and is not...

Continue Reading
1.162
Views
0 Comments
Synchronous Counter

Synchronous Counter

Introduction The name "Synchronous Counter" comes from the fact that all the flip-flops inside the counter are driven through a single clock source and because of this parallel clock sourcing arrangement of flip-flops in a synchronous counter, they are often referred to as “Parallel...

Continue Reading
62 Views0 Comments
Introducing the Banana Pi BPI-M5 Pro: A Next-Generation AIOT Platform
SBC

Introducing the Banana Pi BPI-M5 Pro: A Next-Generation AIOT Platform

The Banana Pi BPI-M5 Pro presents a cutting-edge solution for AIOT (AI + IoT) applications, boasting the advanced features of the second-generation 8nm high-performance Rockchip RK3576 chip design. This powerhouse is equipped with a 6 TOPS computing power NPU (Neural Processing Unit)...

Continue Reading
1.101
Views
0 Comments
OKdo & DEBIX Launch DEBIX Infinity Industrial SBC with i.MX 8M Plus SoC
SBC

OKdo & DEBIX Launch DEBIX Infinity Industrial SBC with i.MX 8M Plus SoC

At Embedded World 2024, OKdo and DEBIX in a joint venture have announced DEBIX Infinity Industrial SBC. The SBC is powered by an NXP i.MX 8M Plus Quad Lite processor, and features dual GbE ports, dual-band Wi-Fi, Bluetooth 5.2, and many other features. The NXP i.MX 8M Plus is a...

Continue Reading
1.057
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives