Search Results for : display
ThermoDuino – OLED Display Thermometer and Tiny Arduino Board
ThermoDuino is a mini Arduino compatible board that consists of LM35 temperature sensor, ATMEGA328 chip, and 0.96″ OLED display. The board has been designed to measure temperature. We have used the LM35 SO8 SMD sensor which is connected to A0 analog pin of the chip, and the OLED...
Continue ReadingTTGO T5: ESP32-Based Development Kit with 4.7-inch e-Paper Display
We have been seeing some interesting packages when it comes to e-ink displays. As they establish themselves further on the market, by claiming some space that was once material for the LCD displays, the industry keeps on delivering more and more options for us, makers, to tinker with....
Continue ReadingThermoDuino – OLED Display Thermometer and Tiny Arduino Board
ThermoDuino is a mini Arduino compatible board that consists of LM35 temperature sensor, ATMEGA328 chip, and 0.96" OLED display. The board has been designed to measure temperature. We have used the LM35 SO8 SMD sensor which is connected to A0 analog pin of the chip, and the...
Continue ReadingDigital Pressure Gauge 0 to 10kPa (0 to 1.75 psi) with OLED display
The project presented here is a Digital Pressure Gauge using an OLED display. The measuring range of this unit is 0 to 10kPa (0 to 1.75 psi). Additional this compact open-source hardware is Arduino compatible. This board can be used for measuring low pressure up to 1.75psi with great...
Continue ReadingDigital Pressure Gauge 0 to 10kPa (0 to 1.75 psi) with OLED display
The project presented here is a Digital Pressure Gauge using an OLED display. The measuring range of this unit is 0 to 10kPa (0 to 1.75 psi). Additional this compact open-source hardware is Arduino compatible. This board can be used for measuring low pressure up to 1.75psi with great...
Continue ReadingCurrent Meter Using 0.96″ OLED Display
This project provides an economical and precise solution for DC current sensing and display on an OLED display. This board uses the ACS715T-20A hall effect-based linear current sensor chip, 0.96 Inch I2C OLED Display and Atmega328 microcontroller chip. It is an Arduino compatible...
Continue ReadingMorphESP 240 ESP32-S2 board integrates a 1.3-inch color display (Crowdfunding)
We have seen a lot of variations of the ESP32 throughout its life cycle. At Morpheans, the lack of boards for the ESP32-S2 triggered them into making their own take on the board. Then, the MorphESP 240 was born! An ESP32-S2 based board with a high-resolution IPS, colorful display built...
Continue ReadingCurrent Meter Using 0.96″ OLED Display
This project provides an economical and precise solution for DC current sensing and display on an OLED display. This board uses the ACS715T-20A hall effect-based linear current sensor chip, 0.96 Inch I2C OLED Display and Atmega328 microcontroller chip. It is an Arduino compatible...
Continue Reading