Page 148 – Electronics-Lab.com

u-blox launches world’s smallest GPS module

Posted on 15 June, 202216 June, 2022 by mixos

The ultra-low-power u-blox MIA-M10 module delivers long-lasting, dependable performance using a tiny antenna and battery and speeds up the development of compact asset tracking solutions.

u-blox, a leading global provider of positioning and wireless communication technologies and services, has announced its smallest GNSS (Global Navigation Satellite System) module series to date, the u-blox MIA-M10. Built on the ultra-low-power u-blox M10 GNSS platform, MIA-M10 offers the most power-efficient solution for size-constrained battery-powered asset tracking devices. The module targets an expanding market for people, pets, and livestock trackers, as well as industrial sensors and consumer goods.

Roughly half the size of competing products, the 4.5 by 4.5-millimeter MIA-M10’s miniature form factor allows developers to design more attractive and comfortable solutions, further driving the adoption of positioning technology in consumer and industrial solutions. The module offers ultra-low power consumption without compromising GNSS performance. Moreover, its power-save modes can double the battery life by optimally balancing position accuracy and power consumption.

Key Features:

4.5 x 4.5 mm chip-sized module requiring no external components
Less than 25 mW power consumption without compromising GNSS performance
Twice the battery life by leveraging optimized power save modes
Maximum position availability with concurrent reception of 4 GNSS
Proven excellent performance, even with small antennas

High RF sensitivity for superior positioning performance

Like all u-blox M10 modules, MIA-M10 concurrently receives four GNSS constellations (GPS, Galileo, BeiDou, and GLONASS) for maximum satellite signal availability. Combined with its superior RF sensitivity, the module offers robust positioning performance for solutions with small antennas as well as for devices operating in weak signal environments found, for example, in deep urban canyons.

Support for u-blox AssistNow assisted GNSS service, which delivers orbital data via the internet, cuts the time it takes the MIA-M10 to determine its initial position at startup, allowing it to immediately track satellites without having to wait for slow satellite data downloads to complete. And applications requiring extra-long power autonomy can use u-blox’s CloudLocate service, which extends the life of IoT applications by offloading power-hungry position calculations to the cloud.

The chip-sized, ready-to-use GNSS module requires no external components, reducing engineering and testing efforts, saving costs and resources, and speeding up time to market.

A growing market of battery-powered trackers

MIA-M10 is available in two product variants. The MIA-M10Q targets a growing market of highly size-constrained battery-powered tracking devices. Its small size, low power demand, and performance make it a natural fit for wearable devices used to keep an eye on the whereabouts and wellbeing of children, the elderly, and pets and livestock, as well as for highly dynamic applications like small drones, cameras, bike computers, and battery-powered sensors.

The second product variant, the MIA-M10C, targets customers requiring more flexibility to combine the module with an active or custom antenna circuit.

“MIA-M10 is the smallest GNSS module on the market – as small as a chip design, but with all the benefits of a module. Combining the exceptional sensitivity and short acquisition times of the ultra-low-power u-blox M10 GNSS platform, the MIA-M10 series offers a highly attractive solution for power- and size-constrained end devices, in particular in the growing wearable tracking device market,” says Kevin Truempi, Senior Product Manager, Product Center Positioning, at u-blox.

MIA-M10 will be on display at the upcoming Sensors Converge and Embedded Technologies, trade show in San Jose, California at booth 1228. The first samples will be available in July, 2022.

more information: https://www.u-blox.com/en/product/mia-m10-series

Limited Offer On Ortur Laser Engraving Machines exclusively on Madethebest

Posted on 15 June, 202215 June, 2022 by Saumitra Jagdale

Madethebest is a professional platform that specializes in laser engravers and 3D printers, which may bring an improvement to our lifestyles. It is now collaborating with Ortur, becoming an official authorized third-party platform for selling Ortur’s more reliable and best-quality products. In addition to their best value for money deals, Madethebest offers free shipping and tax fee for almost all Ortur products and several other products just for bringing cost-efficient and best-quality machines to your doorsteps. The hassle-free shopping experience provided by Madethebest just requires you to visit the official website and pick your favorite machine. There is a “weekly deal” offer currently running on Madethebest’s official website, where you can also get an additional gift after placing the order.

Madethebest offers a special discount to get an additional $30 off on the new Ortur Laser Master 2 Pro LU2-10A Laser Engraving Machine and the Ortur Laser Master 2 S2 LF/SF by using the coupon code provided for both of these products, respectively. This is a limited-time offer from 8th June 2022 to 20th June 2022.

Limited time deal: $30 off on LU2-10A

Engrave and create your ideas with world-class quality from the Ortur’s latest LU2-10A Laser Engraver loaded in the new Ortur Laser Master 2 PRO. The upgraded Ortur Laser Master 2 Pro outperforms its predecessor in every way. With a speed of 10,000mm per minute, this is the first fastest laser engraving machine in the world which uses diode technology. Due to such fast performance, the engraving time is cut in half compared to other machines in the market. Cutting with high precision and power allows you to shape your ideas quickly with top-quality results.

LU2-10A Laser Engraver is claimed to be a valid 10W output laser module. High power laser output allows faster engraving on any type of material and therefore reduces engraving time. This fixed-focused laser engraver can significantly enhance the efficiency of the product. The air assist feature provides a smooth airflow, maintaining heat circulation.

Noteworthy Features of Ortur Laser Master 2 Pro LU2-10a Laser Engraving Machine

Reinforced aluminum alloy is used to manufacture this 400mm x 400mm large area carving Laser Master 2 Pro. It consists of an OLM-PRO-V10 motherboard with a 32-bit MCU. The OLF-V1.5 firmware enables you to work cleverer and faster. Its 12-bit precision PWM control signal delivers over 1000 grayscale levels, resulting in realistic photo-like details. Engraving fine and clear lines up to 0.06mm. High precision and covering minute delicate details accurately is only possible through its 0.05 x 0.1mm focal light reach.

Control software for Ortur Laser Master 2 Pro LU2-10a Laser Engraving Machine has a paid and a free version based on their respective operating system. The most popular LaserGRBL is free software that supports Windows XP, 7, 8 and 10. LaserGRBL allows you to freely import pictures in different formats, edit them in PhotoShop, Inkscape, CAD, etc., and then engrave and cut them with a laser engraver. Whereas LightBurn is an easy-to-use paid software that works with only Mac OS and Linux.

Ortur offers inbuilt safety features which may help in preventing harm to the user and machine:-

Active Position Protection: A machine’s displacement or tilted position causes it to stop automatically.
Laser Beam Safety Guard: If the machine fails due to some defects in USB-Signal transmission, the advanced laser module stops or turns off automatically in three seconds.
Exposure Duration Detection and Limitation: The machine shuts down automatically when the motor is inactive for too long, and this feature also helps reduce energy consumption.
Power Control System: This system controls and maintains a steady power flow. If any fluctuation is detected, it automatically switches the machine off.
Flame detector: The high-power laser modules are more likely to catch fire in an ongoing process. So to alert the user, the machine comes with a flame detector which may avoid accidents in the future.

Create your masterpiece with the new Ortur Master 2 Pro powered by the latest 10A Ortur Laser Module. You can order it using the coupon code ZBP10A30 and get $30 off on this value-for-money deal. This deal is only valid from 8th June 2022 to 20th June 2022. For US, EU and CA customers, the shipping and tax fee is absolutely free.

$30 off on 2 S2 LF/SF

The new Ortur Laser Master 2 comes with the second-generation compressed focal spot laser module (LU-2, LU2-4 SF, LU2-4 LF). This second-generation laser module can also be seen in the Ortur AUFERO LASER 2 . This machine offers a specialized motherboard with 32bits MCU. The laser module used in this machine comes with two variants, LU2- SF and LU2-4 LF, while LU2-SF is more focused and specializes in engraving. On the other hand, LU2-4 LF is better for cutting as it also has an air assist feature.

Talking about the range, in contrast to other 8-bit desktop laser engravers, which could only have a range of S0-S255, Ortur’s Laser Module provides the laser range of S0-S1000 and a fixed 50mm focal range. Ortur’s Laser Modules have better control on their laser beam such that a high beam laser module can be used to draw a picture on a paper.

Noteworthy features of Ortur Laser Master 2 S2 LF/SF

With a 32bit MCU, it can process 32 instructions and support baud rates as high as 92100, making it even more powerful. The engraving area offered by Ortur Laser Master 2 S2 LF/SF is 410mm x 390mm at 5000mm/ Min. The Laser Master 2 comes with two software based on their operating systems; LaserGRBL is a free software supporting Windows XP, 7, 8 and 10, without worrying about the format, you can import images, edit them in photoshop, CAD, Inkscape and then engrave and crave your ideas. On the contrary, LightBurn is a paid, easy-to-use software that supports Mac OS and Linux.

Ortur never misses out regarding the product’s safety as they guarantee four safety features that can avoid future mishaps.

Active Position Protection: A machine’s displacement or tilted position causes it to stop automatically.
Laser Beam Safety Guard: If the machine fails due to some defects in USB-Signal transmission, the advanced laser module stops or turns off automatically in three seconds.
Exposure Duration Detection and Limitation: The machine shuts down automatically when the motor is inactive for too long, and this feature also helps reduce energy consumption.
Power Control System: This system controls and maintains a steady power flow. If any fluctuation is detected, it automatically switches the machine off.

Carve and engrave your ideas more precisely with premium quality by switching to the Ortur Laser Master 2 S2 LF/SF. Use the coupon code: ZBS230 to get an additional $30 off between 8th June 2022 to 20th June 2022. The shipping and tax fee is laid off completely for the customers residing in the US, EU and CA. Shop Ortur Laser Master 2 S2 LF/SF now at Madethebest.

Microchip Technology PIC16F18015/25/44/45 MCUs

Posted on 14 June, 2022 by mixos

Microchip Technology PIC16F18015/25/44/45 MCUs have digital and analog peripherals for cost-sensitive sensor and real-time control applications. This family is available from 8 to 44-pin packages in a memory range of 3.5 KB to 28 KB. The devices have speeds up to 32MHz. The family includes a 10-bit ADCC, automated CVD techniques, an 8-bit DAC module, and many more waveform control and communication peripherals.

Features

C Compiler Optimized RISC Architecture Operating Speed
- DC – 32MHz clock input
- 125ns minimum instruction time
16-Level Deep Hardware Stack
Low-Current Power-on Reset (POR)
Configurable Power-up Timer (PWRT)
Brown-out Reset (BOR)
Watchdog Timer (WDT)

Block Diagram

more information: https://www.microchip.com/en-us/product/PIC16F18015

Monolithic Power Systems (MPS) MP5017A Current Limit Switches

Posted on 14 June, 2022 by mixos

Monolithic Power Systems (MPS) MP5017A Current Limit Switches are designed to protect circuitry on the output from transients from the input. These ICs also protect the input from unwanted shorts and transients coming from the output. The MP5017A current limit switches feature a 3V to 5.5V continuous operating input voltage (V_IN) range, 210μA low Quiescent current (I_Q), and output discharge. These switches also feature 16V absolute maximum V_IN, reverse current blocking, and integrated 45mΩ R_DS(ON) power MOSFET. The MP5017A current limit switches are ideal for use in HDDs, SSDs, hot-swap devices, wireless modem data cards, PC cards, and USB power distribution applications.

FeaturesMPN

3V to 5.5V continuous operating input voltage (V_IN) range
16V absolute maximum V_IN
210μA low quiescent current (I_Q)
Output discharge
SAS/OV disable to support DEVSLP or power_down
Fault indication for Over-Current Protection (OCP), Over-Temperature Protection (OTP), and Output Over-Voltage Protection (OVP)
Reverse current blocking
5.8V fast output OVP response
Integrated 45mΩ R_DS(ON) power MOSFET
Adjustable current-limit through ILIMIT
Programmable Soft-Start Time (t_SS) via the DV/DT pin
Fast response for hard-short protection
OTP auto-retry with 76ms recovery delay
Available in a OFN-12 (2mm x 3mm) package

Application Diagram

more information: https://www.monolithicpower.com/en/mp5017a.html

Kneron AI Edge Computing Modules with Kneron KL720 NPU

Posted on 14 June, 2022 by mixos

Kneron AI Edge Computing Modules with Kneron KL720 NPU is an innovative on-device edge AI solution that works seamlessly with cloud-based AI. The modules implement Kneron’s Reconfigurable Artificial Neural Network (RANN) technology that adapts in real-time to audio, 2D, or 3D recognition applications while also being compatible with mainstream AI frameworks and convolutional neural network (CNN) models. The AI Edge Computing Modules are based on the KL720, permitting maximum power efficiency and performance for segments.

Features

Kneron KL720 NPU
Single – Compliant to M.2 2242 B-key (USB2.0 or USB3.0 interface)
Dual – Compliant to M.2 2280 B-M key (PCIe interface)
Breakable PCB to support 3 sizes: 2242, 2260 and 2280
Support 620 x 620, higher resolution recognition

Specifications

1.4TOP/s NPU Performance
128MB LPDDR3 memory
Operating temperature of 32°F to 122°F (0°C to 50°C with cooler 5m/s)
Storage temperature 32°F to 158°F (0°C to 70°C)
Operating humidity 0% to 90% relative humidity, non-condensing
Certification CE/FCC Class A

more information: https://www.kneron.com/solutions/soc/

Adafruit unveils QT Py ESP32-C3 development board with Wi-Fi and Bluetooth support

Posted on 14 June, 2022 by Abhishek Jadhav

Adafruit has been famous for developing miniature development boards for IoT applications, such as the Adafruit QT Py dev boards powered by RP2040 and SAMD21. Adafruit, yet again, comes with another QT Py with ESP32-C3 module that supports Wi-Fi and Bluetooth Low Energy wireless connectivity. As a RISC-V microcontroller onboard, the hardware gives a lot of flexibility to new developers to explore the vast capabilities of a RISC-V process.

Recommended reading: Adafruit QT Py– SAMD21 Dev Board with STEMMA QT

As mentioned earlier, the ESP32-C3 module is based on the RISC-V open-standard instruction set architecture with a single-core 32-bit RISC-V processor core, clocked at a frequency of up to 160MHz. The key highlight of the microcontroller device is the wireless connectivity support for a complete Wi-Fi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP and Station mode, and promiscuous mode. On the Bluetooth side, the Bluetooth LE subsystem supports features of Bluetooth 5 and Bluetooth mesh.

Specifications of QT Py ESP32-C3 dev board

SoC: Espressif ESP32-C3FN4 ultra-low-power, highly integrated MCU-based microcontroller
Memory: 400kB of SRAM
Storage: 4MB of flash storage
Wireless connectivity: IEEE802.11b/g/n Wi-Fi and Bluetooth LE
LEDs: Built-in RGB NeoPixel LED
GPIOs: 13x GPIOs
- 11 on breakout pads
- 5x 12-bit analogue inputs
- PWM outputs on any pins
- I2C port on breakout pads shared with STEMMA QT plug-n-play connector
- Hardware UART, which is also a hardware serial debug port
- Hardware SPI
- Hardware I2S on all pins
Serial communication: I2C, UART, SPI
Software support: Arduino IDE and MicroPython
Weight: 2.1 grams

Interestingly, even the small form factor development board comes with a hardware I2C port on the breakout pads that can be used as a STEMMA QT plug-n-play connector. Leveraging the standardized interface, developers can seamlessly connect various modules and sensors that add functionality to the development board. Some of the widely used sensors are air quality sensor, capacitive touch sensor, proximity, light, RGB and gesture sensor, time-of-flight distance ranging sensor, and many more. A detailed view of STEMMA QT products can be found on the Adafruit website.

If you are interested in purchasing the Adafruit QT Py ESP32-C3 dev board, head to the product page, where it is priced at $9.95.

Pine64’s Quartz64 Model B keeps it cool without any heatsink onboard

Posted on 14 June, 202214 June, 2022 by Abhishek Jadhav

A Hong Kong-based electronic embedded design company, Pine Store Limited (also referred to as Pine64 or PINE64), has released yet another single-board computer with a quad-core 64-bit Arm processor core– QUARTZ64 Model-B. The initial model was released in June 2021, while the latest addition comes in May 2022, powered by the Rockchip RK3566 system-on-chip with a MALI G-52 graphics processing unit. The high-performance single-board computer is designed to deliver seamless video streaming benefiting from a single 4K display at 60 frames per second.

The Rockchip RK3566 SoC is a mid-range system-on-chip that is designed to target AIoT applications leveraging the Arm Cortex-A55 processor core. The RK3566 SoC is an upgraded version of the original RK3288 with a 64-bit CPU and up-to-date GPU with some modern peripherals, such as USB3.0. The chip is fabricated using 22nm process technology allowing the SoC to speed up to a clock frequency of 2.0GHz. The powerful multimedia decode and encode capability gives the single-board computer the flexibility to support various decoding formats, including 4K60p H.264, H.265, and VP9.

Specifications of Pine64 Quartz64 Model B SBC

SoC: Rockchip RK3566 featuring 64-bit quad-core Arm Cortex-A55 processor cores with a clock frequency of 2GHz.
Performance: The CPU performance is up to 0.8TOPS for the neural network acceleration engine.
GPU: MALI G-52 graphics unit
Memory: 4GB LPDDR4 RAM
Storage: USB port, microSD card slot and eMMC module from 16GB to 128GB
Wireless connectivity: Wi-Fi 802.11a/b/g/n/ac and Bluetooth 5.0
Display interface: MIPI-DSI interface supporting up to 4K 60 frames per second digital video port
Camera interface: MIPI-CSI interface
Human interface: Infrared remote control receiver
Sound: 3.5mm stereo audio jack with mic input
Expansion: Gigabit ethernet with PoE expansion, 1x USB3.0, 1x USB2.0, miniPCIe slot
GPIOs: 40 pins
Serial communication: SPI, I2C, UART
Power: 5V/3A DC jack power supply
Dimensions: 85x56x18.8 mm

The onboard module that provides wireless connectivity to the Pine64 Quartz64 model B single-board computer is the AzureWave’s AW-CM256SM module. The hardware supports Wi-Fi IEEE802.11a/b/g/n/ac and Bluetooth 5.0 to introduce a highly integrated wireless local area network solution that lets users enjoy the digital content through advanced wireless technology. The module enables a high-performance, cost-effective, low-power, compact solution that fits onto the SDIO and UART combo stamp module. The AW-CM256SM module uses Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM), BPSK, QPSK, CCK and QAM baseband modulation technologies.

If you are interested in purchasing the Pine64 Quartz64 Model B for 4GB LPDDR4 memory, the single-board computer is priced at $59.99 on the official product page. There is also a detailed Wiki page provided by the manufacturer for both of the models of Pine64 Quartz64.

Volla Phone 22 with an “uncompromising” privacy protection gets 1000% crowdfunded

Posted on 14 June, 2022 by Abhishek Jadhav

German designer Hallo Welt Systeme started a campaign for a smartphone that comes with uncompromised privacy protections two years ago and shipped thousands of devices across 55 countries across the globe. After the first successful year and continuous customer feedback ecosystem, the developers have come up with yet another smartphone with a classy design, high performance, and hardware sustainability– Volla Phone 22. Previously launched on Kickstarter raised 1000% more than the goal and has now moved the crowdfunding to the Indiegogo page, where you can still support and participate in the project.

The Volla Phone 22 has a minimalistic design with an embedded powerful CPU– MTK Helio G85, a mainstream Arm SoC for smartphones with 12nm FinFET process technology that integrates 8 CPU cores. There are two fast Arm Cortex-A75 cores clocked at a frequency of 2.0GHz for performance tasks and six small Arm Cortex-A55 processor cores at 1.8GHz for efficiency. The new devices come with a 3x higher camera resolution, 2x higher memory capacity and optimized performance through Mediatek HyperEngine technology. The additional option for two nano-SIM cards allows the design to enable users to use a memory card of up to half a terabyte at the same time.

Specifications of Volla Phone 22

CPU: MTK Helio G85 octa-core processor with HyperEngine Technology clocked at a frequency of 2.0GHz
GPU: Mali-G52 graphics unit
Display: 6.3-inch full HD+ V-Notch display with a pixel density of 410 PPI
Front camera: 16 MP
Main camera: 48 MP + 8MP ultra-wide-angle and macro camera
Memory: 4GB RAM
Storage: 128GB internal with optional expansion up to 0.5TB through microSD card
Wireless connectivity: IEEE 802.11a/b/g/n/ac, Bluetooth 5.0, NFC, 2G/3G/4G
Sensors: Fingerprint, location, proximity, brightness, compass, gyroscope
Ports: USB Type-C (USB 2.0 and USB-OTG)
Audio: 3.5mm audio jack
SIM: 2 nano-SIM cards
Weight: 210 grams
Dimensions: 157.5x75x10.4 mm

A key highlight of the Volla Phone 22 is the second-generation Volla operating system that is “smarter, simpler, and more secure.” The only feature offered on the Volla Phone 22 is the ability to write an encrypted Signal message directly from the Springboard without having to open the app and reply directly with a Signal or Multi-Media Message in the matching conversation history. The springboard is the home screen where the developers have provided access to all important everyday functions and information to increase the level of efficiency “never seen before.”

If you are interested in pledging for the Volla Phone 22, head to the Indiegogo campaign page. Also, if you have missed the Kickstarter project, those residing in Europe can now pre-order the Volla Phone 22 regularly in the official online store.

Fingerbot Sense smart button-pusher is ready to become your health protector

Posted on 14 June, 2022 by Abhishek Jadhav

On June 7, 2022, a Los Angeles, California-based IoT design startup Adaprox launched a touchless control button pusher, Fingerbot Sense, for IoT applications that can be controlled using Zigbee or Bluetooth Low Energy wireless connectivity. The manufacturer has been around for a while with the early two launches of the Fingerbot series– Fingerbot in 2020, Fingerbot Plus in 2021, and the latest Fingerbot Sense in 2022. This gives us an idea that the designers have been taking feedback from their existing customers and keeping the ecosystem active for developing new products.

The Fingerbot Sense comes in two versions– the Zigbee version and Bluetooth version, which can be controlled in various smart methods, including mobile application, voice control, scheduling, timer, home automation with other products, and many more (yet to discover). Its classy design and module arm allow it to be deployed in a variety of scenarios to control home appliances, such as coffee machines, air conditioners, elevators, garage doors, automated coffee at a scheduled time, and voice-activated garage doors. In the wake of the covid pandemic, social distances have become important, and interacting with devices remotely will bring more health safety to public spaces. “Let it be your smart button-pusher plus your health protector,” says the manufacturer.

Specifications of Fingerbot Sense

Colour: White and Black
Dimensions: 34.5×34.5×34.5 mm
Stall torque: 2.0kgf cm
Maximum movement: 12mm
Wireless connectivity: Bluetooth Low Power 4.2 and Zigbee 3.0
Battery type: CR2.3.0V
Operating temperature: -10°C to +45°C

Combination of arms in Fingerbot Sense

Straight arm: By default, the button-pusher comes with a regular-lengthed straight arm which is suitable for triggering buttons and other places where a simple push will be enough to perform the function.
Rocker arm: Rocker arm is sold separately and has a flexible flat surface at the end that enables it to be able to pull up and push down the switch.
Toggle arm: Toggle arm comes in an O-shaped tip and is designed to cling to the toggle switch and then flip it in both directions.
Customizable arms: The customizable and special arms come as 3D printed files that let you customize a unique arm for your custom needs.

Pressing modes

Click mode: This mode imitates as if the user is pressing the button. In this mode, the Fingerbot Sense will move its arm down and retract after some time which can be configured as per the customer’s requirements.
Switch mode: For on/off switches, this mode is specially designed for the arm to stick to one side of the switch, relying on push/pull to perform the on/off action.
Program mode: This program is a custom mode wherein the user can program the Fingerbot Sense to do repeated movements.
Multistate mode: If your IoT application requires three or more stages, then the multistate model is the desired solution for you.

If you purchase the Bluetooth version, it can be directly controlled using your smartphone, but without the help of a Homehub, some of the features are restricted. For the Zigbee version, the Fingerbot Sense requires Homehub and gives a more stable connection for a wider range. The Fingerbot Remote support the Zigbee protocol only and to control the button-pusher via a Fingerbot Remote, a Homehub is required to act as a bridge to convert all the instructions to the cloud. All the Fingerbot Sense are Bluetooth by default, and if you are interested in the Zigbee option, make sure you select the ‘Upgrade a Fingerbot Sense to Zigbee’ option in the add-on.

You can find more details on the crowdfunding Kickstarter product page, where you can start pledging as low as $25 for an early bird Fingerbot Sense unit, and it goes up to $449 for an early bird party bundle that gives you 16x Fingerbot Sense, 8x Fingerbot Toolpack, and 2x Homehub.

IBASE Launches 11th Gen Intel Core SBC with Quad Displays Support

Posted on 14 June, 2022 by mixos

IBASE Technology Inc., a world leader in the manufacture of industrial and embedded computing solutions is proud to launch the IB956 high-performance single-board computer in a 3.5-inch form factor. Powered by 11th Gen Intel® Core™ / Celeron® processors (formerly Tiger Lake H), the versatile embedded board supports four displays through three DisplayPort and 24-bit dual-channel LVDS interfaces, making it ideally suited for applications in factory automation, gaming, retail, and healthcare industries. This industrial-grade board is built to operate in both fan and fanless systems, providing 24/7 operation and high reliability.

IB956 FEATURES:

Onboard 11th Gen Intel® Core™ / Celeron® processor (formerly Tiger Lake H)
1x DDR4 SO-DIMM, Max. 32GB
Supports 3x DisplayPort (DP connector + Type-C connector) and 24-bit Dual-channel LVDS
2x Intel® 2.5 Gigabit LAN
6x USB 3.1, 2x USB 2.0, 2x SATA III, 2x COM, 2x M.2
Watchdog timer, Digital I/O, iAMT (15), TPM (2.0)

In addition to its compact form factor, the IB956 fits up to 32GB of DDR4 SO-DIMM memory and is equipped with two Intel® 2.5 Gigabit LAN, six USB 3.1 (1 x Type C & 5 x Type A), two USB 2.0, two SATA III, two serial ports and two M.2 slots (2280/2230) for NVMe with PCIe(4x) and CNVi to meet all data transmission and connectivity requirements in various IoT applications. Measuring 102mm by 147mm, the IB956 runs on 12V~24V wide-range DC power and works with both Windows® 10 and Linux Ubuntu operating systems.

“Our IB956 embedded board is designed with quad-display support, allowing customers to multitask across multiple displays without additional components,” said Wilson Lin, Director of IBASE Product Planning Department. “Heat dissipation is accomplished through our optional heatsink with fan and heat spreader for installation on the bottom layer and seamless system integration, hence shrinking time to market for our clients and reducing total cost of ownership.”

For more information, please visit our website at www.ibase.com.tw