Joystick Controlled 2 x RC Servo motors – Arduino Compatible
Motor

Joystick Controlled 2 x RC Servo motors – Arduino Compatible

This project enables easy control of 2 RC servo motors using a thumb joystick. This is an Arduino compatible project and it consists of a thumb joystick, ATMEGA328 microcontroller, filter capacitor on dc supply, and other components. The thumb joystick has 2 axes, X and Y. The joystick...

Continue Reading
1.841
Views
0 Comments
Getting Started with Espressif’s ESP32-C3-DevKITM-1 on Arduino IDE
ArduinoIoT

Getting Started with Espressif’s ESP32-C3-DevKITM-1 on Arduino IDE

Espressif Systems ESP32-C3-DevKit M-1 is an extremely powerful board for your IoT applications. Driven by the ESP32-C3FN4 chip, this low-power, low-cost, Wifi-Bluetooth-enabled board has its own unique place in the ESP32 board line-up. You can program your ESP32-C3-DevKITM-1 module in...

Continue Reading
11.232
Views
1 Comments
Joystick Controlled 2 x RC Servo motors – Arduino Compatible

Joystick Controlled 2 x RC Servo motors – Arduino Compatible

This project enables easy control of 2 RC servo motors using a thumb joystick. This is an Arduino compatible project and it consists of a thumb joystick, ATMEGA328 microcontroller, filter capacitor on dc supply, and other components. The thumb joystick has 2 axes, X and Y. The...

Continue Reading
1.015 Views0 Comments
Humidity Meter Using OLED Display – Arduino Compatible
Arduino

Humidity Meter Using OLED Display – Arduino Compatible

This is an easy to build, very compact, and low profile Arduino compatible platform to build a humidity meter/Gauge using a 0.96Inch OLED display. The project consists of Atmega328 microcontroller, 0.96Inch OLED display, 3.3V regulator, and HIH5030 analog humidity sensor from Honeywell....

Continue Reading
2.372
Views
0 Comments
Humidity Meter Using OLED Display – Arduino Compatible

Humidity Meter Using OLED Display – Arduino Compatible

This is an easy to build, very compact, and low profile Arduino compatible platform to build a humidity meter/Gauge using a 0.96Inch OLED display. The project consists of Atmega328 microcontroller, 0.96Inch OLED display, 3.3V regulator, and HIH5030 analog humidity sensor from...

Continue Reading
2.231 Views0 Comments
Arduino UNO-like AB32VG1 Development Board based on RISC-V MCU
Arduino

Arduino UNO-like AB32VG1 Development Board based on RISC-V MCU

Recently, there have been several developments in the RISC-V community with its increasing use case in various domains. We have seen this open-source technology grow at an impressive rate, catching the eye of the makers’ community to implement extraordinary projects. To help them, a...

Continue Reading
2.387
Views
0 Comments
Arduino Leonardo Board Features USB Human Interface Device
Arduino

Arduino Leonardo Board Features USB Human Interface Device

Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. For programming, the previous version of Arduinos required a serial port connection to your computer. As the platform evolved, using a USB conversion chip was only a slight...

Continue Reading
2.074
Views
0 Comments
RadSens module: An ultracompact Arduino Dosimeter
Test/Measurements

RadSens module: An ultracompact Arduino Dosimeter

A dosimeter is an extensively used device for measuring ionizing radiation. Modern electronic personal dosimeters can be worn by a person to monitor the dose of radiation received. These modern dosimeters can give a continuous readout of cumulative dose and current dose rate and can...

Continue Reading
2.249
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives