Search Results for : analog devices
4-channel voltage supervisors accurate to ±0.5%
Analog Devices' LTC2962-LTC2964 family of 4-channel voltage supervisors has been designed with exceptional accuracy for increased system voltage margin and enhanced reliability. [via] ASIC, FPGA, DSP, MCU and MPU architectures that operate from supplies as low as 1V cannot utilize...
Continue ReadingBack-up power manager can support two supercapacitors
A complete supercapacitor back-up power management system for 2.9 to 5.5V supply rails is available from Analog Devices. The LTC4041 uses an on-chip bi-directional synchronous converter to provide high efficiency step-down supercapacitor charging. There is also high current, high...
Continue ReadingIntegrated battery charger has optional power point tracking
An integrated, high voltage multi-chemistry synchronous monolithic step-down battery charger and PowerPath manager with onboard telemetry functions and optional maximum power point tracking (MPPT) has been announced by Analog Devices. The Power by Linear LTC4162 is 3.2A, 35VIN/35VOUT...
Continue ReadingLow profile regulator has digital power system management
Available as either a dual 10A or single 20A thin uModule regulator, the LTM4686 has a PMBus interface and is housed in a 16 x 11.9 x 1.82mm LGA package. The Power by Linear regulator’s low height allows the it to be placed on a PC board very close to its load such as an FPGA or...
Continue Reading50A µModule regulator scalable to 250A runs cool with inductors exposed as heatsinks
Analog Devices announces the Power by Linear LTM4678 dual 25A or single 50A step-down µModule regulator with PMBus digital interface. By stacking and exposing its two inductors on top of BGA package, the LTM4678 uses the inductors as heat sinks to transfer heat from inside, keeping the...
Continue ReadingLED regulator can be configured in choice of operation modes
A DC/DC µModule regulator from Analog Devices is designed to drive LEDs. The Power by Linear LTM8005 regulator includes a DC/DC controller, power switch, Schottky diode and current sense resistor in a 9.0 x 11.25 x 2.22mm BGA package. The LTM8005 operates from a 5.0 to 38V input...
Continue ReadingVersatile 60V synchronous boost LED controller
High efficiency, a programmable internal LED PWM signal generator and optionally low-EMI spread spectrum modulation are the specific characteristics of Analog Devices’ Power by Linear LT3762 synchronous boost LED controller. The chip targets a broad range of application worlds, from...
Continue ReadingFully-integrated smoke detector reduces false alarms
With the introduction of the ADPD188BI, Analog Devices (ADI) kills two birds with one stone: First, this smoke detector meets the latest international regulatory standards. Second, the device that integrates two LEDs, photodiode, and analog front-end (AFE) in a single package, help...
Continue Reading