Search Results for : ESP32

FluidNC TMC2209 Pen/Laser CNC Controller is an ESP32-based 2-axis CNC controller with FluidNC firmware. This CNC controller is designed for machines that use stepper motors on 2 axes. These include pen drawing machines, laser cutters/engravers, sand plotters, etc. It also has an RC...

Espressif Systems has now released a stable version of ESP32 Arduino Core 3.0.0 with support for ESP32-C6 and ESP32-H2 MCUs based on the ESP-IDF 5.1.4 framework. As usual, you can now use this latest version of IDF in your Arduino IDE, but at the time of writing it's unclear whether...

ThingPulse has developed a USB-C plug featuring ESP32-S3, flash memory of 128MB, and capacitive touch for commands. This ThingPulse Pendrive S3 can work as a BadUSB device, sending hundreds of keystrokes per second and executing predefined commands through simple scripts. The WiFi Duck...

DFRobot has recently added two new boards to its FireBeetle 2 series called the FireBeetle 2 ESP32-UE and FireBeetle 2 ESP32-E  both the boards are equipped with an ESP32-WROOM-32UE-N16R2 MCU and feature onboard GDI display interface and onboard charging circuits. The main...

Waveshare ESP32-S3-Matrix Dev Board is an ESP32-S3-based development board that features an 8×8 addressable RGB LED Matrix(64 LEDs in total), 15 usable GPIO pins, and a 9-axis attitude sensor that can be used for robotics and motion control applications. In addition to that it is...

Matej Planinšek of PLab, has developed the FOCn - A ESP32-S3-based medium-power BLDC Motor driver module that has the capability of delivering up to 10A of continuous current. The USP of this device is that it supports SimpleFOC Arduino Library making it easy to control BLDC and...

The NanoCell V2.1 is an ESP32-C3 powred dev board designed by Frapais’ lab in Greece. The board comes preloaded with ESPHome and features a battery management IC for battery-based low-power applications. The board has A buck-boost converter that has been developed to minimize standby...

Waveshare ESP32-S3-Tiny Board is an ESP32-S3-powered development board in a 23.50 x 18 mm from factor. What makes this board different from the Waveshare RP2040-Tiny is that it features 34 multi-function GPIO pins compared to 23 found on the RP2040-Tiny board. On the board, you have an...