Glo – Multiple LED strip controller that is Arduino-compatible
Led

Glo – Multiple LED strip controller that is Arduino-compatible

Light-emitting diodes (LEDs) are simple components that are used as visual indicators or LED lighting. Controlling just one strip of LEDs with an Arduino Uno and the likes is not so much of a big deal for most embedded designers but installing and controlling multiple strips of LEDs,...

Continue Reading
2.184
Views
0 Comments
Open source Arduino blood glucose meter shield uses electrochemical test strips
Arduino

Open source Arduino blood glucose meter shield uses electrochemical test strips

Diabetes is a serious disease that affects millions of people around the world today. Diabetes affects the body’s ability to produce insulin, a hormone that enables the body to turn glucose into sugar which has resulted to a large number of deaths, an estimate of 1.6 million deaths...

Continue Reading
7.282
Views
1 Comments
MKR Windy – Arduino MKR inspired board with STM32WL LoRa SoC
IoTMcu

MKR Windy – Arduino MKR inspired board with STM32WL LoRa SoC

Just recently, we wrote about Midatronics' MKR SharkyPro BLE, Zigbee, OpenThread development board that is based on STM32WB55 MCU in an Arduino MKR form factor. We are back with excitement to inform you that the company also has a similar looking MKR Windy board that follows the same...

Continue Reading
3.008
Views
0 Comments
PD Micro – Breadboard-Friendly USB-C Power Supply Based on Arduino
ArduinoUSB

PD Micro – Breadboard-Friendly USB-C Power Supply Based on Arduino

We have all been there. Everytime we start adding new peripherals, sensors and actuators to our projects, we eventually will reach a point where the 3.3 and 5 V voltages from the microcontroller (when they are available) are not enough, either because we require more current than what...

Continue Reading
3.395
Views
0 Comments
MKR SharkyPro Boards Packs STMicroelectronics’ STM32WB55CG into an Arduino MKR Form Factor
IoT

MKR SharkyPro Boards Packs STMicroelectronics’ STM32WB55CG into an Arduino MKR Form Factor

In the midst of discovering wireless modules that simplify Bluetooth LE, Zigbee, OpenThread connectivity, it turned out that Midatronics also has a SharkyPro module based on STM32WB55, and they have launched a pair of Arduino MKR form factor development boards called MKR SharkyPro I...

Continue Reading
2.216
Views
0 Comments
TinyDecoder – Cool IR Receiver and NEC Decoder with Arduino
Arduino

TinyDecoder – Cool IR Receiver and NEC Decoder with Arduino

Infrared has been around for a long while. It has proven to be reliable enough so that basically almost everything remote and short range, that came before home automation was cool enough to be considered a thing, and battled its place fairly with RF technologies, so it deserves some...

Continue Reading
3.306
Views
0 Comments
Arduino Nano 33 IoT-based NTP World Clock
IoT

Arduino Nano 33 IoT-based NTP World Clock

Arduino Nano 33 IoT can be used to enhance existing devices and creating new ones to include IoT and to design network-specific applications. This article focuses on one of such applications which uses Network Time Protocol by clock synchronization between systems all over the world. It...

Continue Reading
4.486
Views
0 Comments
RGBDuino UNO and RGBDuino RGB Shield: Add Light and Questionable Arduino PCB
Arduino

RGBDuino UNO and RGBDuino RGB Shield: Add Light and Questionable Arduino PCB

Now, from my writing experience here at eLab, I have dealt with some funny and interesting concepts, but nothing quite like what I am about to show you. But bear with me here, aside from the questionably looking electronics you are about to glance, there might be something useful to...

Continue Reading
3.975
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives