Search Results for : AI
Phantom Powered Microphone Preamplifier – Low Noise – Professional Quality
The project presented here is a professional quality Phantom powered Microphone pre-amplifier. The project is built using the INA163 chip from TI. The Chip is a very low-noise, low-distortion, monolithic instrumentation amplifier. R2 and R3 provide a current path for a conventional...
Continue ReadingIsolated RS-485 Transceiver with Level 4 EMC and Full ±42 V Protection
The project presented here is an isolated RS-485 transceiver that features up to ±42 V of ac/dc peak bus overvoltage fault protection on the RS-485 bus pins. The project is based on the ADM2795E chip. The device integrates Analog Devices, Inc., iCoupler® technology to combine a...
Continue ReadingCrowbar Circuit Using TRIAC and TL431 Precision Programmable Reference
This Crowbar project can be used for preventing an overvoltage or surge condition of a power supply unit from damaging the circuit connected to the power supply. It operates by putting a short circuit and fuse blow across the voltage output, like dropping a crowbar across the output...
Continue ReadingStepdown DC-DC Converter with Current Limit
The step-down DC-DC Converter project presented here provides 3.3V @ 1A output from an input range of 8V to 36V DC. The adjustable current limit is an important feature of the project, which prevents the device from accidental output short circuits avoiding excessive load damage. The...
Continue Reading2 Channel Smart Dual Coil Latching Relay Board – 2 Channel Bistable Relay Module
This is a Smart Dual Coil Latching Relay that can control the ON/OFF power of a device by applying a short voltage pulse to Input 1 and Input 2. This project is helpful in low-power applications since the coil is not powered all the time, it only requires a short voltage pulse. Relay...
Continue ReadingRISC-V: Open Standard Instruction Set Architecture on Open Standard Module (OSM)
The two main CPU architectures commonly used in PCs, laptops, cellphones, and embedded devices around the world are x86 and ARM. These architectural designs demand licenses or royalties and are proprietary. They do not provide continual support, and they prevent businesses from creating...
Continue ReadingArduino Cloud gets a feature called phone device to enable a quick out-of-the-box experience with the platform
Arduino released a cloud platform, Arduino Cloud, that would enable developers and hobbyists to build smart connected projects based on a wide range of electronic hardware products, such as Arduino, ESP32, and even ESP8266. The company understands the entry barriers to using a cloud...
Continue ReadingItalian pasta brand, Barilla introduces a passive cooker– an open-source project to reduce CO2 emissions
Arduino has written a blog post on Barilla using an Arduino Nano 33 BLE board to provide an open-source project for the passive cooking of pasta– makes a remarkable positive impact on the environment by reducing CO2 emissions by up to 80 percent, as claimed. As the blog post...
Continue Reading