Search Results for : pi zero
PIR Sensor
This project is an automatic PIR sensor. Description Project is based on Holteks IC HT7610A, which is a CMOS LSI chip designed for use in automatic PIR lamp, flash or buzzer control. It can operate in 3-wire configuration for relay applications. In our project we have used...
Continue ReadingLearning Board for Microchip PIC12F683 microcontroller
Introduction Electronics is my hobby. When I was in college I had some experience with microcontrollers; I did few projects with Atmel's AT89C51. Recently, I have grown interest on PIC microcontrollers, and I thought I should start with 8-pin microchips. I picked PIC12F683...
Continue ReadingPIC based WWVB clock
Introduction There are many DIY versions of WWVB clock designs available on the web. Commercial "atomic" clocks are inexpensive and widely available, but I wanted to try my hand at designing one to gain insight into WWVB reception and to learn a little about programming a PIC...
Continue ReadingPicoBuck – RGB LED Driver
The PicoBuck is a small and inexpensive 3-channel LED driver. It employs constant-current buck driving which approaches an efficiency of 95% (theoretical). It's based on AL8805 LED Lighting Buck Driver from Diodes Inc. Description The PicoBuck supports a wide range of input...
Continue ReadingCANable 2.0 is an Open-Source USB-to-CAN Adapter with SocketCAN and Slcan Support
The CANable 2.0 USB-to-CAN Adapter is a small, low-cost, open-source USB-to-CAN adapter that allows your computer to communicate with devices on a CAN bus network. It supports both standard CAN and CAN-FD and is compatible with various operating systems including Linux, Mac, and...
Continue ReadingSBC Case Builder v3.0: Design Your Custom Case for SBCs and Standard Motherboards
SBC Case Builder v3.0 is the latest iteration of the versatile case design utility, offering users the ability to create thousands of cases for popular single-board computers (SBCs) and standard motherboards. This new version boasts an impressive library of over 1,000 standard cases,...
Continue ReadingThe RADXA ROCK S0 Is Powered by Rockchip RK3308BS CPU
The Radxa ROCK S0 is a compact development board powered by the 64-bit Rockchip RK3308BS SoC, featuring four Arm Cortex-A35 cores. It offers RAM options of 256MB or 512MB and comes with onboard eMMC storage available in 2GB, 4GB, or 8GB capacities. With a price tag of $11.90, this board...
Continue ReadingMeet the new SBC Case Builder 2.0
The dire need to always find a suitable case to match your design needs especially as it is almost becoming difficult to rely on SBC vendors to provide you with one, has in recent times brought about the invention of some laser cut enclosures with Inkscape and likewise the development...
Continue Reading