Search Results for : arduino uno

Introduction Hi guys, Welcome to this tutorial. Today we will build a breathalyzer using the MQ3 gas sensor, an OLED display and Arduino. A breathalyzer is a generalized trademarked name for  devices used for determining blood alcohol content from a breath sample. This means the...

Over the years FPGAs have become readily available to the maker community. They are now more accessible than ever as many development boards has seen the light. It’s now possible to embed a soft-core MCU into an FPGA  rather than using a hard-core ASIC MCU and here is where PulseRain...

David Johnson-Davies @ technoblogy.com has a nice guide on how to program ATtiny10 6-pin mcu using the arduino IDE. Programming is done using the widely available USBasp programmer from Thomas Fischl. Examples are also included on the guide. Unlike the SPI protocol used to program the...

Even if you have years working with electronics, you will still find some simple hacks that you never thought about before. Personally and to save money, when I was a student with a very limited budget I knew that my Arduino UNO can work as a USB/TTL(serial) converter. I used to remove...

Hariharan Mathavan at allaboutcircuits.com designed a project on using Bluetooth to communicate with an Arduino. Bluetooth is one of the most popular wireless communication technologies because of its low power consumption, low cost and a light stack but provides a good range. In this...

Arduino Uno home weather station with e-ink display The hardware used for this project is: Waveshare 4.3 e-ink display Arduino Uno Adafruit BME280 combined temperature, humidy and atmospheric pressure DS3231 based hardware clock Arduino Weather Station With E-Ink...

The concept of this board is to build an open, very versatile frequency counter, so it can be used to measure a wide variety of signals. It is designed to be customizable in every possible way. Freq_LF_HF v1.0 board uses the famous AVR microcontroler Atmega328p-AU. This is not the...

Introduction Despite ATtiny series is considered extremely cheap and useful, still there is a lack of projects and tutorials about it. In this tutorial, you will learn how to start building applications using ATtiny13 microcontroller programmed using Arduino IDE. First of all,...