Search Results for : GPIO pins

There has been extensive coverage on the Raspberry Pi 400 news that witnessed innovation in designing single-board computers. All manufacturers, developing embedded boards in the same design and form factor, lack a lot of innovation, which is much needed in this demanding edge AI...

The China-based embedded electronics specialist, Lilygo, has released a low-cost development board, the T-Zigbee board that combines the ESP32-C3 microcontroller and the Telink TLSR8258 multi-protocol wireless SoC. The ESP32-C3 is a single-core Wi-Fi and Bluetooth 5 (LE)...

Adafruit has been famous for developing miniature development boards for IoT applications, such as the Adafruit QT Py dev boards powered by RP2040 and SAMD21. Adafruit, yet again, comes with another QT Py with ESP32-C3 module that supports Wi-Fi and Bluetooth Low Energy wireless...

A Hong Kong-based electronic embedded design company, Pine Store Limited (also referred to as Pine64 or PINE64), has released yet another single-board computer with a quad-core 64-bit Arm processor core– QUARTZ64 Model-B. The initial model was released in June 2021, while the latest...

NanoPi R2C Plus is an SBC (single-board computer) designed and developed by FriendlyElec. This new release can be used in several applications ranging from industrial usage to even personal use but is mainly used for IoT applications. The NanoPi R2C Plus is an open-source platform that...

Wemos has unveiled a new development board for the LOLIN family, LOLIN C3 Mini is powered by an Espressif ESP32-C3FH4 Wi-Fi and BLE RISC-V microcontroller. The board follows the company’s earlier versions of WEMOS D1 Mini (ESP8266) and LOLIN S2 Mini (ESP32-S2) form factor and is...

An interesting embedded device created by the Sequent Microsystems, Beagle-Pi, a Raspberry Pi Emulator has solved the problem of incompatibility of HATs to a Beaglebone. The Beagle-Pi converts the two 2 x 23 connectors of the Beaglebone into the 2 x 20 GPIO connector of the Pi making...

Onboard-RP2040 | USB-C Type Port | Multiple HAT Connectivity | ESP8266 | 0.91 OLED | 40-Pins GPIO Connectivity | 16 Mega-Byte Flash There are several ways where you can find PiSquare very useful, as we were bound to use a single HAT on Raspberry Pi or max to max 5 Raspberry Pi HATs...