Search Results for : PCB
Project-piCo is an Open-Sourced Raspberry Pi Pico with a USB Type-C Port
Sam Hocevar's Project-piCo is an open-source Raspberry Pi Pico board with a USB Type-C port. In a Reddit post, Hocevar explains I really wanted a Type-C connector on my Pico H, and I wanted it even more when I found out that the device was released less than 5 years ago and it still...
Continue ReadingCH32V003 USB Development Board
LECTRONZ has introduced a new USB Development Board called CH32V003. It's designed for people who like to tinker with RISC-V microcontrollers. The main part of the board is a microcontroller called CH32V003F4U6 made by WCH. It can run at speeds up to 48 MHz, has 16KB of storage for...
Continue ReadingSparkFun Pro Micro – ESP32-C3 Features a Qwiic Connector
SparkFun has recently announced the "SparkFun Pro Micro - ESP32-C3" board, an ESP32-C3-based development board featuring SparkFun's Qwiic Connect System. This compact board includes Wi-Fi, Bluetooth, GPIO, SPI, UART, I2C, I2S, and all the necessary hardware required for advanced IoT and...
Continue ReadingRobotics Arm Controller using PS3 Wireless Remote
This project enables the user to control an RC servo-based robotics arm wirelessly. The board is based on ESP32-WROOM 32E Bluetooth/Wi-Fi module, thus PS3 or PS4 wireless remote can be paired. The project is built using ESP32 chip with Bluetooth and Wi-Fi connectivity, 4...
Continue ReadingBluetooth Robot Car Controller using ESP32
This wireless robot car controller board is built using an ESP32 BT/Wi-Fi module, 2 x H-Bridges, 3.3V regulator. It also includes an ESP32 programming connector, power LED, screw terminal connector for the power supply, header connector for motors, and high-value capacitors on the DC...
Continue ReadingH-Bridge for High Power Brushed DC Motor with Current Sense
This H-bridge board is an easy-to-use brushed DC motor driver that can handle large-size motors such as wheelchair motors, and winch motors. An H-bridge is an electronic circuit that switches the polarity of a voltage applied to a load. The circuit is built using 4 x N-Channel...
Continue ReadingIsolated RS-232 to RS-485 Signaling Converter
This project provides a solution for converting RS232 signaling to RS485 signaling. This allows long-distance communication since the range supported by RS232 is normally less than 50 feet while RS485’s range can exceed 1000 feet. The design features an RS232 transceiver, an RS485...
Continue ReadingArduino Board Includes a USB-C Port, LDR, Power Switch, and Many Other Features
Designed by Polia31, the Axiometa Spark is a Custom Arduino Board with all the most used features that are used in everyday projects. Features of this custom Arduino board include a USB-C port, triple rows of pin headers for easy connections, an interrupt-supported user button, and...
Continue Reading