PICKit 3 Mini
Mcu

PICKit 3 Mini

Reviahh has published a new project, the PICKit 3 Mini: Previously, I made a Pickit 3 clone – (see previous blog post). It works well, but I have often wondered just how little of its circuitry was needed to program and debug the boards I make. For instance – I primarily use the...

Continue Reading
4.579
Views
0 Comments
SystemView PRO – Analyze your Firmware Behavior Like a PRO
Mcu

SystemView PRO – Analyze your Firmware Behavior Like a PRO

Segger Microcontroller is known for J-Links device about debugging and programming lots of architectures: ARM, Microchip PIC32 and Renesas RX. Segger provides a lot of other software and hardware tools for debugging and programming purposes; SystemView is one of these tools. SystemView...

Continue Reading
4.404
Views
0 Comments
PingPong IoT Development Board – Connecting Hardware to the Cloud
IoTMcu

PingPong IoT Development Board – Connecting Hardware to the Cloud

Germany-based Round Solutions developed the PingPong, a powerful and flexible hardware platform for IoT and machine-to-machine (M2M) applications. The PingPong can be used for both wired and wireless connections. The modular hardware design can integrate custom-specific applications and...

Continue Reading
7.434
Views
0 Comments
OpenScope, An Open Source Multi-function Board
HardwareProducts

OpenScope, An Open Source Multi-function Board

In order to make learning and using electronics accessible to all, Digilent Inc., an electrical engineering products company, had created a new powerful and affordable tool for  beginners and enthusiasts. ‘OpenScope’ is an instrumentation device that empowers makers, hobbyists,...

Continue Reading
7.395
Views
0 Comments
Weather Station Based On ChipKIT
LCD/OLED/ePaperSensor

Weather Station Based On ChipKIT

ChipKIT Uno32 by Digilent is an easy-to-use platform for developing microcontroller-based applications. It uses chipKIT-core development environment and Arduino IDE for compatibility with existing code examples, tutorials and resources. Pin-compatible with many Arduino shields that can...

Continue Reading
7.151
Views
0 Comments
DHT11 Temperature and Humidity Sensor with Pinguino
ArduinoBasic ElectronicsSensor

DHT11 Temperature and Humidity Sensor with Pinguino

DHT11 is a common humidity & temperature sensor. This sensor has a single wire serial interface with special timing diagram for the single wire interface. When the MCU sends a start signal, DHT11 sends a response signal followed by the humidity reading and then the...

Continue Reading
5.338
Views
0 Comments
Microchip announced MPLAB® Harmony Graphics Composer GUI Tool
Software

Microchip announced MPLAB® Harmony Graphics Composer GUI Tool

Microchip announced MPLAB® Harmony Graphics Composer (MHGC), a modern and flexible graphical user interface (GUI) composer tool. Microchip Technology Inc. (NASDAQ: MCHP), a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions, today announced the MPLAB®...

Continue Reading
4.953
Views
0 Comments
FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments
Youtube

FLIR MR160 Thermal Imaging & Moisture Meter Review, Teardown & Experiments

The Signal Path Blog published another video reviewing  FLIR MR160 Thermal Imaging & Moisture Meter: In this episode Shahriar takes a close look at the FLIR MR160 Thermal Imaging and Moisture Meter. Featuring Infrared Guided Measurement (IGM) technology powered by a FLIR...

Continue Reading
5.190
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives