7nm GNSS receiver for wearables cuts power by 5x
GPSIC

7nm GNSS receiver for wearables cuts power by 5x

Broadcom Inc. today announced the world’s lowest power L1/L5 GNSS receiver chip, the BCM4778, optimized for mobile and wearable applications. Equipped with the latest GNSS innovations, this third-generation chip is 35% smaller and consumes 5 times less power than the previous...

Continue Reading
1.845
Views
0 Comments
A Versatile Cellular-IoT Prototyping Platform with Self-powering Capabilities and Preloaded Global Data for Out of the Box Connectivity
IoT

A Versatile Cellular-IoT Prototyping Platform with Self-powering Capabilities and Preloaded Global Data for Out of the Box Connectivity

Conexio Technologies are ready to launch their new IoT development kit powered by a Nordic nRF9160 system in package (SiP) which features an ARM cortex M33 application processor. The device can be used for building cellular-connected electronic projects such as asset tracking...

Continue Reading
1.800
Views
1 Comments
315Mhz RF Remote Transmitter – Arduino Compatible
RF

315Mhz RF Remote Transmitter – Arduino Compatible

This is a two-channel RF Transmitter unit that consists of, Atmega328 microcontroller, 2 Tactile switches with pull-down resistors, a programming port, and a 315Mhz RF transmitter module. It is an Arduino compatible open-source project that can be used for many RF transmitter...

Continue Reading
1.676
Views
0 Comments
4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible
RF

4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible

This is a 4 channel RF Transmitter unit that consists of an Atmega328 microcontroller, 4 x tactile switches with pull-down resistors, programming port, and 315Mhz RF transmitter module. It is Arduino compatible open-source project that can be used for many RF transmitter applications....

Continue Reading
1.676
Views
0 Comments
315Mhz RF Remote Transmitter – Arduino Compatible

315Mhz RF Remote Transmitter – Arduino Compatible

This is a two-channel RF Transmitter unit that consists of, Atmega328 microcontroller, 2 Tactile switches with pull-down resistors, a programming port, and a 315Mhz RF transmitter module. It is an Arduino compatible open-source project that can be used for many RF transmitter...

Continue Reading
826 Views1 Comments
4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible

4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible

This is a 4 channel RF Transmitter unit that consists of an Atmega328 microcontroller, 4 x tactile switches with pull-down resistors, programming port, and 315Mhz RF transmitter module. It is Arduino compatible open-source project that can be used for many RF transmitter applications....

Continue Reading
804 Views0 Comments
World’s smallest UWB module delivers low-power for IoT devices
IoT

World’s smallest UWB module delivers low-power for IoT devices

Murata has launched the world’s smallest ultra-wideband (UWB) module – measuring just 10.5 mm x 8.3 mm x 1.44 mm – that combines elevated levels of accuracy and reliability with low-power to ensure compact and battery-driven IoT devices operate as efficiently and cost-effectively...

Continue Reading
1.971
Views
0 Comments
Meet ESP32-C3 Board on top of a Rechargeable 16340 Battery
IoT

Meet ESP32-C3 Board on top of a Rechargeable 16340 Battery

What can be better than ESP8266 and ESP32? Maybe a battery-powered ESP32-C3 board designed to provide lower power consumption. LILYGO® has just launched an ESP32-C3 board with a rechargeable 16340 battery holder. The new board, aptly named LILYGO TTGO T-OI PLUS consumes lesser...

Continue Reading
2.397
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives