Wemos launched its latest creation: the Wemos Lolin C3 Pico ESP32-C3 board
IoT

Wemos launched its latest creation: the Wemos Lolin C3 Pico ESP32-C3 board

Wemos, a manufacturer of affordable and easy-to-use electronic boards, has launched its latest creation: the Wemos Lolin C3 Pico ESP32-C3 board. The new board is a successor to the Lolin C3 Mini, with additional features like battery charging support. The Lolin C3 Pico is a small,...

Continue Reading
1.329
Views
0 Comments
Tiny ESP32-S3 IoT controller M5Stack ATOMS3 Lite
IoT

Tiny ESP32-S3 IoT controller M5Stack ATOMS3 Lite

ATOMS3 Lite is the newest addition to the M5Stack Atom series of wireless programmable controllers. It is based on the ESP32-S3 IoT platform. It is possible to use it as an Internet of Things node, a microcontroller, or even in wearables. It also has a wide range of other applications,...

Continue Reading
1.422
Views
0 Comments
H-Bridge Motor Driver with Integrated Current Sense and Regulation using DRV8874

H-Bridge Motor Driver with Integrated Current Sense and Regulation using DRV8874

In past, we have published many brushed dc motor driver boards for various projects and usually, they have some sort of limitations, as some of them are large in size, require large size heatsink, doesn’t have current feedback, they don’t have overload protection, some require...

Continue Reading
1.024
Views
0 Comments
433 MHz is alive! Communicating with 433 MHz sensors using an ESP32 board and LoRa module.
ArduinoSensor

433 MHz is alive! Communicating with 433 MHz sensors using an ESP32 board and LoRa module.

While Matter, Bluetooth, Zigbee, and Zwave may get all the press these days, 433 MHz was the simple yet reliable technology that our sensors and devices relied on before they became popular. Given the wide range of applications for the 433 MHz, generalizations regarding the technology are...

Continue Reading
1.653
Views
0 Comments
Launching MKR IoT Carrier Rev2 board with a Bosch SensorTech BME688
ArduinoIoTTop Stories

Launching MKR IoT Carrier Rev2 board with a Bosch SensorTech BME688

The Bosch SensorTech BME688 4-in-1 pressure, humidity, temperature, and gas sensor has replaced the HTS221 humidity sensor and the LP22HB barometric pressure sensor on the MKR IoT Carrier Rev2 board for Arduino MKR boards, and the LSM6DSOX has been replaced the LSM6DS3. The Arduino MKR...

Continue Reading
1.176
Views
0 Comments
Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython
ArduinoIoTTop Stories

Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython

The Cytron Maker Feather AIoT S3 is an ESP32-S3 board that fits the Adafruit Feather form factor. It is good for makers and STEM education because it has LEDs for GPIOs, a buzzer, expansion headers and connectors, and support for CircuitPython and Arduino. The WiFi and Bluetooth LE IoT...

Continue Reading
1.176
Views
0 Comments
LilyGO TTGO T5-4.7 E-Paper Weather Station

LilyGO TTGO T5-4.7 E-Paper Weather Station

The LILYGO T5 4.7 inch E-Paper ESP32 Development Board is an exciting 4.7" e-paper display integrated with an ESP32 WiFi/Bluetooth module. The board's processor is ESP32-WROVER-E with 16MB of FLASH memory and 8MB of PSRAM. The ESP32 module supports Wi-Fi 802.11 b/g/n and Bluetooth...

Continue Reading
2.516 Views10 Comments
Pika Power Board is a simple breadboard power supply
Power supply

Pika Power Board is a simple breadboard power supply

It's with excitement that we bring to your attention the new Pika power board designed for outstanding user experience and aimed at making powering your projects and gadgets easy. The board was built by Uk-based electronics solutions specialist, TikStation. Pika power board is designed...

Continue Reading
1.253
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives