Atman IoT Platform
IoT

Atman IoT Platform

Atman IoT Platform as a Service (PaaS) is the ideal solution for getting your IoT solution up and running in a very short time. Atman IoT is also available as a stand-alone server, packaged in a preconfigured, ready to use Docker container. Atman IoT Platform is a Service, focused on...

Continue Reading
1.710
Views
0 Comments
Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)

Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)

The project presented here is a two-channel infrared remote ON/OFF switch that can be used to control home appliances, Lights, Fans, Water Pumps, Aquarium pumps, Ovens, Heaters, etc. This open-source project contains 2 x SSR (Solid State Relay), Arduino Nano, and TSOP1838 infrared...

Continue Reading
2.571 Views0 Comments
Olimex launched ESP32-S2-DevKit-Lipo-USB Development Board
IoT

Olimex launched ESP32-S2-DevKit-Lipo-USB Development Board

ESP32-S2-DevKit-Lipo-USB is an ESP32-S2 based development board with USB host and device functionality USB-OTG ESP32-S2 is a highly integrated, low-power, single-core Wi-Fi Microcontroller SoC, designed to be secure and cost-effective, with high performance and a rich set of IO...

Continue Reading
2.342
Views
0 Comments
Industrial Shields Raspberry Pi UPSberry
Raspberry Pi

Industrial Shields Raspberry Pi UPSberry

Industrial Shields Raspberry Pi UPSberry offers a 10 second of UPS saver using input from Raspberry Pi. This Raspberry Pi UPS shield is a Plug-and-Play UPS smart shield including a Real-Time Clock (RTC) for Raspberry Pi. The Raspberry Pi operates at 12Vdc or 24Vdc supply voltage. This...

Continue Reading
2.332
Views
0 Comments
INA190-Q1, 40V, bi-directional, ultra-precise current sense amplifier
ICTop Stories

INA190-Q1, 40V, bi-directional, ultra-precise current sense amplifier

The INA190-Q1 is an automotive, low-power, voltage-output, current-shunt monitor (also called a current-sense amplifier). This device is commonly used for monitoring systems directly connected to an automotive 12-V battery. The INA190-Q1 can sense drops across shunts at common-mode...

Continue Reading
2.238
Views
0 Comments
Providing Balance with the NX8MM-D168
SBC

Providing Balance with the NX8MM-D168

It may difficult to find a balance when searching for the perfect platform to begin a new project. Trying to balance price, power, and optimal performance while ensuring the end-product accurately represents a company poses a challenge for many out there. To help make this decision...

Continue Reading
1.733
Views
0 Comments
Make your Raspberry Pi Pico Project with 5 Free Pico using Seeed Fusion’s PCB Assembly Service
Raspberry Pi

Make your Raspberry Pi Pico Project with 5 Free Pico using Seeed Fusion’s PCB Assembly Service

Raspberry Pi launched its own MCU RP Pico (Raspberry Pi Pico) featuring the RP2040 SoC back in January. Since then, Pico has become quite popular and a lot of platforms are coming up with their support to Raspberry Pi Pico. Hence, the RP Pico is all about customization of its...

Continue Reading
3.018
Views
0 Comments
The Tiny Yet Powerful tArmDuino Features an STML071 MCU
Arduino

The Tiny Yet Powerful tArmDuino Features an STML071 MCU

When you think of a tiny Arduino, all you expect is as many Arduino features as possible that can be large flash memory, programming connections, and obviously smaller board size. Developer Doctek designed a similar Arduino powered by ultra-low-power 32-bit MCU ARM Cortex-M0+...

Continue Reading
2.102
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives