Search Results for : Stemma QT Connector
![LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA](https://www.electronics-lab.com/wp-content/uploads/2024/02/LILYGO-T-FPGA-ESP32-S3-Development-Board-M-2-Slot-FPGA-GW1NSR-LV4CQN48PC6-I5-low-power.jpg_-e1707530742928.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA
The LILYGO T-FPGA development kit consists of two components: an M.2 module and a carrier board. The M.2 module features an ESP32-S3 SoC and Gowin GW1NSR-4C FPGA with 4,608 LUTs along with USB-C OTG for ESP32-S3, a USB-C port for FPGA, four Pmod interfaces, a STEMMA Qt/Qwiic connector,...
Continue Reading![LILYGO T-Panel Combines ESP32-S3 and ESP32-H2 with A 4-inch HMI Display LILYGO T-Panel Combines ESP32-S3 and ESP32-H2 with A 4-inch HMI Display](https://www.electronics-lab.com/wp-content/uploads/2024/01/LILYGO-T-Panel-ESP32-S3-ESP32-H2-Dual-MCU-Development-Board-4-00-inch-Display-ST7701S.jpg_-e1706244908884.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
LILYGO T-Panel Combines ESP32-S3 and ESP32-H2 with A 4-inch HMI Display
The LILYGO T-Panel is a compact module that works as both a display and a control center for smart devices. It has a 4-inch screen and can connect to WiFi and Bluetooth. It also supports smart home standards like Zigbee, Thread, and Matter. Plus, it has options for adding more...
Continue Reading![ESP32-S3 with 3.4-inch Touchscreen: LILYGO New Display Board ESP32-S3 with 3.4-inch Touchscreen: LILYGO New Display Board](https://www.electronics-lab.com/wp-content/uploads/2023/12/T-Display-S3-Long-1024x813.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
ESP32-S3 with 3.4-inch Touchscreen: LILYGO New Display Board
LILYGO's latest T-Display-S3-Long is an ESP32-S3 board featuring a unique 3.4-inch wide touchscreen with a 640×180 resolution, tailored for various applications. This wireless display board features an ESP32-S3R8 WiSoC with 8MB PSRAM and includes a 16MB SPI flash for storage. It also...
Continue Reading![LILYGO’s Upgraded T-Display-S3 AMOLED for $25.68 USD LILYGO’s Upgraded T-Display-S3 AMOLED for $25.68 USD](https://www.electronics-lab.com/wp-content/uploads/2023/04/T-Display.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
LILYGO’s Upgraded T-Display-S3 AMOLED for $25.68 USD
The T-Display-S3 AMOLED is a development board and is an updated version of the T-Display-S3 and has the first combination of an ESP32-S3 with an AMOLED display. The previous LCD display has been replaced with an AMOLED one, which results in an improved color display. In addition, it...
Continue Reading![Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display](https://www.electronics-lab.com/wp-content/uploads/2023/02/Lilygo-T-display_11_600x600-e1677433566726.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display
T-Display-S3 is a development board that has ESP32-S3 as the main control chip. It features a color LCD screen that is 1.9 inches in size and two buttons that may be programmed. The connectivity is made possible by the use of the I8080 interface. It also maintains the same design and...
Continue Reading![Walkie-Talkie module Built On Tiny ESP32 board Walkie-Talkie module Built On Tiny ESP32 board](https://www.electronics-lab.com/wp-content/uploads/2023/01/t-twr-dimensions.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Walkie-Talkie module Built On Tiny ESP32 board
Recently, LILYGO introduced a compact ESP32-S3 gadget that features a Walkie-Talkie module along with additional components like an OLED screen, speaker, microphone, and a slot for a 18650 battery. An ESP32 gadget with a stylus-equipped LCD display was also on show. The T-TWR is said...
Continue Reading![Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython](https://www.electronics-lab.com/wp-content/uploads/2023/01/Maker-Feather-AIOT-S3.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython
The Cytron Maker Feather AIoT S3 is an ESP32-S3 board that fits the Adafruit Feather form factor. It is good for makers and STEM education because it has LEDs for GPIOs, a buzzer, expansion headers and connectors, and support for CircuitPython and Arduino. The WiFi and Bluetooth LE IoT...
Continue Reading![Maker Pi PICO Mini is the latest add-on board for Raspberry Pi Pico and Raspberry Pi Pico W Maker Pi PICO Mini is the latest add-on board for Raspberry Pi Pico and Raspberry Pi Pico W](https://www.electronics-lab.com/wp-content/uploads/2022/10/maker-pi-pico-mini-main-1-800x800-1.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Maker Pi PICO Mini is the latest add-on board for Raspberry Pi Pico and Raspberry Pi Pico W
Cytron Technologies, a Malaysian company that specializes in designing boards and modules that help to simplify digital-making processes for makers and developers, has designed a Maker Pi PICO Mini Board aimed at simplifying projects with the Raspberry Pi Pico / Pico W. Nicknamed...
Continue Reading