Search Results for : display

7 Seven segment multi-plexed display is tiny board that has been designed around Common Anode 4 digit Display, Display has 12 Pins. The board is provided with current limiting resistors on all LED segments and 4 PNP Transistors to drive 4 digits, the project is ideal for easy...

Raj @ embedded-lab.com build an ESP8266 based led matrix display. This matrix is a modification of his previous bluetooth version and uses an ESP8266 as a web server to setup the display message. No other microcontroller is used to control the display so things are kept simple and...

In this video educ8s.tv shows us how to use the Color OLED display with the SSD1331 driver with Arduino. It's very easy! A few weeks ago, I discovered this promising new display on Banggood.com and I thought that it might be useful in some of our projects so I bought it right away....

Single Digit Big Display module using 74HC595 IC project will display large size 7 segment single digit number. 3.5inch height, which can be visible over large distance.  More digit can be connected serially to each other easily connector. This circuit is a single digit seven...

App note from Maxim on using the MAX6954 to drive 14-segment monocolor LEDs, (PDF): This article is how-to guide, intended as a quick learning aid for engineers considering using the MAX6954 to drive 14-segment monocolor LEDs. The MAX6954 is a versatile display driver, capable of...

Single Digit Big Display module using 74HC595 IC project will display large size 7 segment single digit number. 3.5inch height, which can be visible over large distance.  More digit can be connected serially to each other easily trough connector. This circuit is a single digit...

If your application needs a controller with display interface and a network connectivity, then you need to think about using 4Duino from 4D Systems, a 2.4" TFT LCD IoT display module. 4Duino key features 4Duino has ATmega32U4, a 8-bit MCU from Atmel, which is the same...

bobricius @ hackaday.io has designed an ultra thin custom display, requiring only 6 gpio pins to drive 30 leds. FEATURES: - 1.05x0.48 inches (26.67x12.22 mm) - 30 led - any color - ultra thin .... etc. on 0.8mm board - only 6 gpio - ideal for wrist watch 4 digit...