Expansion Shield – Breakout Board for Arduino Nano

Expansion Shield – Breakout Board for Arduino Nano

  If you need to interface many devices and sensors to Arduino Nano, then, this project is for you. This is a Nano expansion I/O shield (breakout board) for the Arduino Nano. The board facilitates the easy connection between Arduino Nano and other devices.  Each Arduino (I/O)...

Continue Reading
5.585 Views2 Comments
Forlinx Launches OK1028A-C networking SBC Offers LVDS displays
SBC

Forlinx Launches OK1028A-C networking SBC Offers LVDS displays

Forlinx has launched the OK1028A-C SBC, alongside a FET1028A-C module, which is designed based on Cortex -A72 featuring dual-core processor LS1028 A up to 1. 5G Hz. It features on-board 2GB DDR4 RAM and 8GB eMMC, can support 5 Gigabit Ethernet ports with TSN, 2 CAN-FD, USB3.0, UART,...

Continue Reading
2.347
Views
0 Comments
Orange Pi Zero 2 SBC debuts Allwinner H1616
Raspberry Pi

Orange Pi Zero 2 SBC debuts Allwinner H1616

With the market being flooded by "Pi" branded products, it becomes hard to find out which ones deserve your attention and bring something new to the table, and not just impersonate the original Raspberry Pi models. This is as big of a rant you are going to get today, as we take a peek...

Continue Reading
3.175
Views
0 Comments
Bluetooth 5.2 Module Powered by Energy Efficient Arm Cortex-M33
IoT

Bluetooth 5.2 Module Powered by Energy Efficient Arm Cortex-M33

The NORA-B10 series are small, stand-alone Bluetooth 5.2 low energy, wireless microcontroller unit (MCU) modules from the Swiss wireless chip manufacturer u-blox. These modules are built around the Nordic nRF5340 chip that is powered by two Arm® Cortex®-M33 processor cores. The first...

Continue Reading
2.471
Views
0 Comments
MP2018 is a 16 V, 500 mA, low quiescent current linear regulator
IC

MP2018 is a 16 V, 500 mA, low quiescent current linear regulator

MPS' MP2018 is a 16 V, 500 mA, low quiescent current linear regulator that features thermal shutdown and short-circuit protection (SCP) The MP2018 from Monolithic Power Systems is a low-power, linear regulator that supplies power to systems with high-voltage batteries. This...

Continue Reading
2.144
Views
0 Comments
FET1028A-C SoM Powered by LS1028A Offers Five-Port Networking Solution
SBC

FET1028A-C SoM Powered by LS1028A Offers Five-Port Networking Solution

Forlinx has published details on the headless sandwich-style OK1028A-C SBC with a FET1028A-C module powered with a 1.5GHz, dual-core, Cortex-A72 LS1028A. The SBC comes with the support for the LVDS interface to enable HMI (Human-Machine Interface) applications. The FET1028A-C module has...

Continue Reading
2.096
Views
0 Comments
Tigard Is Here to Bust Open Any Embedded Physical Interface You Can Find
Interface

Tigard Is Here to Bust Open Any Embedded Physical Interface You Can Find

We have all been there. You get a new development board, you go online to check how you communicate with it and then you realize you need a new connector that costs some extra cash. And here goes on the cycle of electronic waste, because it generally only works with boards from that...

Continue Reading
2.698
Views
0 Comments
Turing Pi 2 mini-ITX case houses a Compute Module 4 from Raspberry Pi
Raspberry PiTop Stories

Turing Pi 2 mini-ITX case houses a Compute Module 4 from Raspberry Pi

Are you on the market for a beefy, general use or cluster computer, but do not want to break the bank or have a giant, power-hungry machine in your office? You might be thinking "nah, too many compromises, no way this is going to work". Then think again, because you should never...

Continue Reading
7.859
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives