Search Results for : ASIC
![Half Bridge with Single PWM Input Half Bridge with Single PWM Input](https://www.electronics-lab.com/wp-content/uploads/2024/06/13-1-1024x588.jpg)
Half Bridge with Single PWM Input
This is a Half-bridge module based on the LM5104 chip, which is a high-voltage gate driver. This High-Voltage Gate Driver is designed to drive both the high-side and the low-side N-channel MOSFETs in a synchronous buck configuration. The floating high-side driver can work with supply...
Continue Reading![One Channel RF Remote Relay Switch One Channel RF Remote Relay Switch](https://www.electronics-lab.com/wp-content/uploads/2024/05/002-5-1024x651.jpg)
One Channel RF Remote Relay Switch
The project described here is one Channel RF remote receiver Relay board. The project is built using LICAL-EDC-DS001 chip from LINX. The board consists of Encoder/Decoder chip, 433Mhz RF Receiver module, 10 x jumpers to set the address, a Relay to drive the output, U2 5V regulator,...
Continue Reading![High-Voltage (180V) – High-Current (30mA) Operational Amplifier Module High-Voltage (180V) – High-Current (30mA) Operational Amplifier Module](https://www.electronics-lab.com/wp-content/uploads/2024/05/009-5-1024x797.jpg)
High-Voltage (180V) – High-Current (30mA) Operational Amplifier Module
This project provides a platform to evaluate the OPA462 high-voltage, high-current operational amplifier. Multiple component footprints allow the most common circuit configurations. The board accommodates high-voltage and high-current operational amplifier OPA462 from Texas...
Continue Reading![QUARK is an open-source Arduino-based electronics multitool with a color display and touch controls QUARK is an open-source Arduino-based electronics multitool with a color display and touch controls](https://www.electronics-lab.com/wp-content/uploads/2024/05/quark-buttons-cs_jpg_gallery-lg-1024x498.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
QUARK is an open-source Arduino-based electronics multitool with a color display and touch controls
While looking for interesting and new products on the crowdfunding website I stumbled upon QUARK, An Arduino-based open-source multitool with a color LCD and a touchscreen display based on an ESP32 WiFI & Bluetooth wireless SoC. The tool is a signal generator and oscilloscope,...
Continue Reading![xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features](https://www.electronics-lab.com/wp-content/uploads/2024/05/output-scaled-1024x576.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features
Previously we have written about many laser engravers like the AlgoLaser Delta, ATEZR P20 PLUS, and many similar but all of those laser cutters and engraver has one thing in common, they were designed for a beginner or a hobbyist who just wanted to get started with engraving, and is not...
Continue Reading![2 Channel MOSFET Module 2 Channel MOSFET Module](https://www.electronics-lab.com/wp-content/uploads/2024/05/007-1024x594.jpg)
2 Channel MOSFET Module
This is a low profile and small size two-channel MOSFET board that can drive loads up to 2 x 3A. The Power Supply is 5V to 14V DC. Inputs and input Enable are TTL-level signals. The Output is by default enabled and an active high signal disables the output. Parallel Operation of Dual...
Continue Reading![BitNetMCU Slims Down TinyML Models BitNetMCU Slims Down TinyML Models](https://www.electronics-lab.com/wp-content/uploads/2024/05/Neural-Networks-on-10-cent-Microcontroller-1.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
BitNetMCU Slims Down TinyML Models
The BitNetMCU framework simplifies the process of training accurate neural networks for deployment on low-end microcontrollers, such as the 15-cent CH32V003. While major releases of new generative artificial intelligence (AI) tools, like large language models and text-to-image...
Continue Reading![ArmSoM SIGE7 SBC Giveaway – Winner announced! ArmSoM SIGE7 SBC Giveaway – Winner announced!](https://www.electronics-lab.com/wp-content/uploads/2024/05/5648e04704acda022930dc6e66c971e10017c6ee-1.jpeg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
ArmSoM SIGE7 SBC Giveaway – Winner announced!
The ArmSoM Sige7 is a compact single-board computer (SBC) powered by an octa-core 64-bit SoC with a 6TOPS NPU for AI tasks and supports up to 32GB of LPDDR4x RAM and 128GB of eMMC flash storage. It includes an M.2 2280 socket for NVMe SSDs. It offers three display interfaces (HDMI,...
Continue Reading