Search Results for : mini PC
![iBASE IB952 – A 3.5-inch SBC with AMD Ryzen Embedded V2000 Processors iBASE IB952 – A 3.5-inch SBC with AMD Ryzen Embedded V2000 Processors](https://www.electronics-lab.com/wp-content/uploads/2024/02/IB952-3.5-inch-SBC-with-AMD-Ryzen-Embedded-V2000-Series-Processors-e1708790698583.png)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
iBASE IB952 – A 3.5-inch SBC with AMD Ryzen Embedded V2000 Processors
iBASE IB952 is a 3.5-inch single-board computer (SBC) powered by the AMD Ryzen Embedded V2000 processors. The device supports up to 64GB DDR4 RAM, dual Gigabit Ethernet, and four 4K displays via AMD Radeon Vega graphics, all these features make this board suitable for enhanced computing...
Continue Reading![Signal Conditioner for Piezoelectric Sensors Signal Conditioner for Piezoelectric Sensors](https://www.electronics-lab.com/wp-content/uploads/2024/03/001-1024x710.jpg)
Signal Conditioner for Piezoelectric Sensors
This is a simple signal conditioner circuit for Piezoelectric sensors. The circuit converts the input charge to voltage and the level shifts to the ADC input range of 0.1 V to 2.4 V. The circuit is built using AD8608 OPAMP from Analog devices. Piezoelectric elements are used to...
Continue Reading![Toybrick TB-RK3588SD: A Rockchip RK3588S-Based SBC in Raspberry Pi Form Factor Toybrick TB-RK3588SD: A Rockchip RK3588S-Based SBC in Raspberry Pi Form Factor](https://www.electronics-lab.com/wp-content/uploads/2024/02/TB-RK3588SD-top.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Toybrick TB-RK3588SD: A Rockchip RK3588S-Based SBC in Raspberry Pi Form Factor
The Toybrick TB-RK3588SD is a single-board computer(SBC) powered by the Rockchip RK3588S, equipped with 8GB LPDDR4X RAM and a dual-core GPU and NPU for AI. It's designed for multimedia applications in AI, VR, and cloud computing, all while maintaining a similar form factor to a...
Continue Reading![Capacitive Humidity Sensor to Analog Output Converter Capacitive Humidity Sensor to Analog Output Converter](https://www.electronics-lab.com/wp-content/uploads/2024/02/006-1024x717.jpg)
Capacitive Humidity Sensor to Analog Output Converter
The project presented here is an analog capacitive humidity sensor converter board suitable for various humidity measurement tasks. The circuit comes from Texas Instruments application note (see below). Most conventional capacitive proximity sensors produce a digital signal, but this...
Continue Reading![Radxa ZERO 3W – A Compact RK3566 SBC with Bluetooth 5.4 and Wi-Fi 6 Radxa ZERO 3W – A Compact RK3566 SBC with Bluetooth 5.4 and Wi-Fi 6](https://www.electronics-lab.com/wp-content/uploads/2024/02/R2564696-01-e1707975497522-1024x459.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Radxa ZERO 3W – A Compact RK3566 SBC with Bluetooth 5.4 and Wi-Fi 6
The Radxa ZERO 3W, powered by the Rockchip RK3566, is an ultra-small single-board computer designed for IoT developers and hobbyists, featuring Wi-Fi 6, Bluetooth 5.4, and support for various graphics standards including OpenGL and Vulkan 1.1. A few posts back we covered similar SBCs...
Continue Reading![LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA](https://www.electronics-lab.com/wp-content/uploads/2024/02/LILYGO-T-FPGA-ESP32-S3-Development-Board-M-2-Slot-FPGA-GW1NSR-LV4CQN48PC6-I5-low-power.jpg_-e1707530742928.webp)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA
The LILYGO T-FPGA development kit consists of two components: an M.2 module and a carrier board. The M.2 module features an ESP32-S3 SoC and Gowin GW1NSR-4C FPGA with 4,608 LUTs along with USB-C OTG for ESP32-S3, a USB-C port for FPGA, four Pmod interfaces, a STEMMA Qt/Qwiic connector,...
Continue Reading![Linear Capacitive Proximity Sensor Linear Capacitive Proximity Sensor](https://www.electronics-lab.com/wp-content/uploads/2024/02/006-1024x717.jpg)
Linear Capacitive Proximity Sensor
The project presented here is an analog capacitive proximity sensor. The circuit is from Texas Instruments application note. Most conventional capacitive proximity sensors produce a "1" or "0" output, this circuit produces a DC output that is a function of the size and relative...
Continue Reading![Banana Pi BPI-F3 De Board – Featuring 8-Core RISC-V K1 Processor with Up to 16GB LPDDR4/4X RAM Support Banana Pi BPI-F3 De Board – Featuring 8-Core RISC-V K1 Processor with Up to 16GB LPDDR4/4X RAM Support](https://www.electronics-lab.com/wp-content/uploads/2024/02/Banana-Pi-BPI-F3-Development-Board-1024x640.jpg)
![](https://www.electronics-lab.com/wp-content/themes/elab/images/advertising_article_events_news_newspaper_icon.png)
Banana Pi BPI-F3 De Board – Featuring 8-Core RISC-V K1 Processor with Up to 16GB LPDDR4/4X RAM Support
The Banana Pi BPI-F3 Dev Board, developed by SpacemiT Technologies Ltd., is a compact development board developed by the RISC-V Foundation's RVA22 standards. The 8-core RISC-V K1 chip powers it and features 16GB of RAM and a 2.0 TOPs NPU, among many others. Previously, we have covered...
Continue Reading