Search Results for : Arduino Nano 33 BLE

Arduino has written a blog post on Barilla using an Arduino Nano 33 BLE board to provide an open-source project for the passive cooking of pasta– makes a remarkable positive impact on the environment by reducing CO2 emissions by up to 80 percent, as claimed. As the blog post...

The NXP has recently introduced RW612, a tri-radio wireless MCU integrating Wi-Fi 6, Bluetooth Low Energy (LE) 5.4, and 802.15.4 radios. Powered by a 260 MHz Arm Cortex-M33 core with TrustZone-M, it includes 1.2 MB of SRAM and a high-bandwidth Quad SPI interface with secure decryption...

If you have a new ATmega328P you’ll need to burn the bootloader, to be able to upload a sketch with Arduino IDE. You can do this using this simple-to-use bootloader burning tool. The board consists of 32-pin TQPF adapter and Arduino Nano. Place the new ATMEGA328 TQFP chip into...

Phyx has created the LANA TNY-CH32V203, a compact development board, inspired by Adafruit's QT Py and Seeed Studio's XIAO, but with added SMD pins for extra I/O options and a built-in WS2811 compatible LED output. It's powered by the WCH CH32V203 RISC-V microcontroller, which has a...

Conexio Technologies, Inc. has recently introduced Conexio Stratus Pro, a battery-powered development board built around Nordic Semiconductor's nRF9161 cellular modem. The unique aspect of this board is that it has support for LTE-M, NB-IoT, and GPS connectivity and to make things even...

ILabs' RP2040 Connectivity Board is an RP2040-based development board with u-blox SARA-R412M for LTE (Cat M1/NB-IoT) and Espressif's ESP32-C3FN4 for WiFi/BLE, designed for versatile IoT applications from remote monitoring to smart connected devices. We've covered various connectivity...

The LILYGO T-FPGA development kit consists of two components: an M.2 module and a carrier board. The M.2 module features an ESP32-S3 SoC and Gowin GW1NSR-4C FPGA with 4,608 LUTs along with USB-C OTG for ESP32-S3, a USB-C port for FPGA, four Pmod interfaces, a STEMMA Qt/Qwiic connector,...

LECTRONZ has introduced a new USB Development Board called CH32V003. It's designed for people who like to tinker with RISC-V microcontrollers. The main part of the board is a microcontroller called CH32V003F4U6 made by WCH. It can run at speeds up to 48 MHz, has 16KB of storage for...