Search Results for : Arduino
2 X AA Battery To 6V Boost Converter For Arduino Nano
This project is simple solution to power Arduino Nano from two 1.5V batteries. Circuit converts 2 X AA alkaline battery power into 6V 100mA using boost topology. Circuit uses SOT223-6 pin TLV61046A boost converter IC. The TLV61046A is a highly integrated boost converter designed for...
Continue ReadingProgramming the ATtiny10 using Arduino IDE
David Johnson-Davies @ technoblogy.com has a nice guide on how to program ATtiny10 6-pin mcu using the arduino IDE. Programming is done using the widely available USBasp programmer from Thomas Fischl. Examples are also included on the guide. Unlike the SPI protocol used to program the...
Continue ReadingHow to drive Nokia 5110 84×48 LCD display with Arduino
In the previous tutorial I showed how to build a weather station using DHT11 and BMP180 with an Arduino. However, the project has a downside which is the power consumption of the 16X2 LCD. If we were building a battery powered project with the desire to last for several weeks and...
Continue ReadingHow to drive Nokia 5110 84×48 LCD display with Arduino
Introduction In the previous tutorial I showed how to build a weather station using DHT11 and BMP180 with an Arduino. However, the project has a downside which is the power consumption of the 16X2 LCD. If we were building a battery powered project with the desire to last for several...
Continue ReadingDevDuino – Learn and Explore Arduino World
DevDuino is a Fully Redesigned and Enhanced Arduino-Compatible Board with Plenty of Must-Have Features. It features a 128x64 OLED display, along with a variety of LED indicators, RTC module, a slot for a micro SD card, and many other convenient features. The project is live on...
Continue ReadingArduino Weather Station with DHT11 and BMP180
In the previous tutorial I showed you how to build a weather station using only the DHT11 sensor and I said the readings from this sensor is fairly accurate. In this tutorial, I will be using the DHT11 to measure only the humidity and BMP180 to measure pressure and temperature. That’s...
Continue ReadingArduino Weather Station with DHT11 and BMP180
Introduction In the previous tutorial I showed you how to build a weather station using only the DHT11 sensor and I said the readings from this sensor is fairly accurate. In this tutorial, I will be using the DHT11 to measure only the humidity and BMP180 to measure pressure and...
Continue ReadingNerdonic Atom X1 is the World’s Smallest 32-bit Arduino Compatible Board
Tiny 32-bit Dev Board. 14.9mm², Breadboard, 0.95g, 3-20V input, I²C, 8 PWM, Serial, 6 ADC, Prog LED. There is a new board in the ecosystem which claims to be the world’s smallest 32-bit Arduino board. The name of it Atom X1 and measures 14.9×14.9 mm. Atom X1 specifications:...
Continue Reading