Search Results for : Arduino

If you need to interface many devices and sensors to Arduino Nano, then, this project is for you. This is a Nano expansion I/O shield (breakout board) for the Arduino Nano. The board facilitates the easy connection between Arduino Nano and other devices.  Each Arduino (I/O) Pin including...

Transmission of video from one location to another in the professional video world is typically done via SDI (Serial Digital Interface). This FPGA-powered device, intended as a test tool for SDI circuits, pushes signals at 1.485 Gbps. Based on an Arduino MKR Vidor 4000, Chris Brown of...

image: CWvox Prototype connected to the radio (Source: Kevin Loughin) These days, it seems like every speech-detection-related project is based on some kind of advanced algorithm, such as machine learning, pattern matching, or spectrum analysis. But Kevin Loughin (AKA KB9RLW), an...

This Arduino shield helps to drive various loads like a solenoid, valve, motor, inductive actuator, heater, and bulb. A wide supply range 8V-60V and a load current of 2.7A allows it to be used with a variety of actuators. The board can be used as a stand-alone driver or it can be...

This is an Arduino-compatible board for creating 2 Digit Display projects. The circuit operates with 5V DC, Connector CN1 is provided for bootloader programming and Arduino firmware upload. A new Atmega328 chip requires a bootloader and Arduino firmware programming, Connector CN1 helps...

The project presented here enables users to switch all kinds of resistive, inductive and capacitive loads, limited by clamping energy (EAS) and maximum current requirement. The user may interface 2 x inductive, resistive, and capacitive loads such as solenoid, dc motor, high current...

The Elephant Robotics ultraArm P340 is a robot arm that has a working radius of 340 mm and is controlled by an Arduino-compatible ATMega2560 control board. The arm of this robot may be outfitted with a variety of accessories that can be used for painting, laser engraving, or grabbing...

Arduino has launched a second version of their Arduino MKR family which features a range of sensors. The Arduino MKR IoT Carrier Rev2 is designed for Internet of Things projects. It provides a range of connectivity options, including Wi-Fi, cellular, and LoRa, as well as a variety of...