Search Results for : Atmel

The ATtiny10 is an intriguing little device with plenty of capabilities. It’s size pushes your creativity but first, it needs to be programmed. This can get a little tricky but here I suggest two easy ways to get started. The Atmel ATtiny101 is a tiny AVR microcontroller with a 6 pin...

CircuitPython is a branch of MicroPhython designed to simplify education and experimentation on low-cost microcontrollers to make it easy to prototype without any upfront desktop software downloads. With CircuitPython, you can write clean and simple Python code to control your hardware...

The recent release from Emile Nijssen might just prove to be one very useful tool in the hands of those investigating in automotive systems as the board is said to allow for MITM message modification on up to three Controller Area Network buses. According to the author of the...

Albert van Dalen writes on avdweb about making a tiny development board in a DIL24 format containing a Microchip/Atmel ATtiny3217 microcontroller. The Dily3217 is an Arduino compatible development board of 30x10mm, easy to integrate since it has a breadboard-friendly narrow DIL24...

Beetle is one of the smallest Arduino Leonardo board.  It derives its core notion from minimalism without compromising functionality. It comes with Atmel AtMega32u4 ( datasheet) @16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins, and 4 pwn pins....

Kevin’s CircuitBrains boards are now listed and live on circuitpython.org/downloads. Kevin submitted the Deluxe model to Crowd Supply will have a project to support fabrication and fulfillment soon – Twitter. [via] CircuitBrains Basic CircuitPython on an ARM Cortex M0 in 1 square...

As you would expect from a stack backed by giants like Adafruit, CircuitPython is overthrowing Micropython and fast becoming one of the most popular stacks for embedded development amongst makers. As a result of this popularity, quite a number of CircuitPython optimized boards are...

Maduino Zero NFC is an IoT (Internet of things) Solution based on the 32-bit Atmel's SAMD21 MCU and NXP Near Field Communication Controller PN532, which is can be used for pay application, entrance guard system etc. The Maduino Zero NFC based on the Arduino, users can program it with...