Search Results for : display

TriLite is proud to present Trixel® 3, the world’s smallest Laser Beam Scanner at SPIE Photonics West from January 23-25 in San Francisco, California, USA. Trixel® 3 is TriLite’s first Laser Beam Scanner Light Engine based on Infineon’s 2D MEMS mirror and is targeting Augmented...

Six months since the release of the Geniatech DB10 AI development board for smart automation applications, the manufacturer has come up with an RK3568-based K3 intelligent development board with high performance and stability. More than a year after the launch of RK3568, it is...

Shenzhen Tomao, one of the leading OEM/ODM manufacturers with over 9 years of experience, has designed an Amlogic T972 multimedia network single-board computer with multiple HDMI inputs and a V-By-One display interface with support for up to 4K resolutions. Targeted at digital signage...

This is a 3 Digit 7-segment display project that contains 3 x Common Cathode displays, current limiting resistors or each LED segment, 3 x PNP Transistor on each common cathode for multiplexing etc. The project works with 5V TTL signals but can be optimized for 3.3V operations by...

This project will help you to easily develop an Arduino compatible project that requires 4 x -7Segment 0.5″ displays. The project consists of an Atmega328 microcontroller, 4 x BC847 NPN transistors to drive the common cathode displays. All displays are used in multiplexing...

This project will help you to easily develop an Arduino compatible project that requires 3 x 7-Segment 0.5″ displays. These are common cathode displays that use multiplexed configuration, BC847 transistor drives 3 x common cathodes, all display segments are connected to the...

This is an Arduino compatible board for creating 2 Digit Display projects. The circuit operates with 5V DC, Connector CN1 is provided for bootloader programming and Arduino firmware upload. A new Atmega328 chip requires a bootloader and Arduino firmware programming, Connector CN1 helps...

This is a 3 Digit 7-segment display project that contains 3 x Common Cathode displays, current limiting resistors or each LED segment, 3 x PNP Transistor on each common cathode for multiplexing etc. The project works with 5V TTL signals but can be optimized for 3.3V operations by...