Search Results for : AI
Site enables detailed component comparisons
by Sagar Savant @ edn.com: Choosing components is a series of time-consuming tasks, from surveying the market for possible candidates to properly evaluating performance. As a hardware engineer who has worked in Silicon Valley for 10 years, I have spent significant time developing...
Continue ReadingSolar Mailbox project
The purpose of this project is to develop a self sufficient Mailbox (real one) that will be powered only by the sun and that will display the number of the house, but only in accordance with the battery level. The system must work autonomously when there is or not enough light to...
Continue ReadingTraId – Transistor Type & Polarity Identifier
TraId is a simple transistor tester and pinout identifier. It is able to test bipolar transistors as well as N-mosfet and P-mosfet. Result are displayed using LEDs driven by a PIC16LF1503 microcontroller. Description The board is using a 14 pin PIC16LF1503 (less than a...
Continue ReadingA Very Simple Power Failure Light
Introduction This is a very basic power failure lighting circuit based around a relay. This simple circuit has many uses, from lighting up rooms and walkways in the case of a power failure, to monitoring and security uses. There are many different power failure circuits out there...
Continue ReadingMotorized Curtain with Remote control
Introduction The project is "Motorized Curtain" with Remote control. It is made up of MCU ATMEGA328 with Arduino BootLoader, motor driver L293D ( i used L293B with external diodes, because i couldn't find L293D ), IR Receiver TSOP 1738, DC Motor from an old printer and...
Continue ReadingLILYGO’s T3-S3 ESP32-S3 Board is Suited for IoT Applications
The IoT industry is constantly looking for improvements in boards that fixate on communication interfaces and low-power performance. We recently came across LILYGO’s T3-S3 ESP32-S3 board which can be lauded for its long-distance communication capabilities and energy efficiency. Key...
Continue ReadingEspressif Thread Border Router Supports IPv6, Service Discovery, and NAT64
Espressif Thread Border Router is a SP32-H2 (802.15.4) and ESP32-S3 (WiFi + BLE) powered development board that has acquired Thread Interoperability Certificate V1.3, which makes it a Thread-Certified Component that supports Matter application scenarios. The ESP Thread Border Router...
Continue ReadinguEye ACP series provides added customization options for board-level cameras
Cost-effective from lot size one, readily available, highly variable As versatile as the IDS industrial camera families are, sometimes customer requirements are so particular that a customized development would be desirable. However, this often only makes sense for larger quantities....
Continue Reading