Search Results for : PCB

Andreas Eberle and his team have created a new Raspberry Pi Compute Module 4 board with ISO interfaces: the CM Hunter. "This is not just another Raspberry PCB," says Andreas Eberle, as he emphasized that the powerful design tool is not just another IO board that requires you to buy so...

We saw thermal imaging cameras for the evaluation of the hardware temperature of various devices. Open thermal camera is compatible with mobile phone applications for thermal imaging and FLIR ETS320 a non-contact thermal imaging camera solution for electronic testing are some of the...

Generally, the SoCs have complex integration processes for deployment purposes. Even if the integration is simple then there is a compromise with the performance factor of the device. Tibbo Technology’s Plus1 SP7021 SoC ensures simple integration with efficient performance comparable...

Toshiba Electronics has released a 100 V high-current photorelay, TLP241B for industrial equipment building automation systems and mechanical relay replacements, security systems, heating, ventilation and air conditioning (HVAC), Battery Management System (BMS), etc. Encompassed in a...

Panasonic Industrial Devices AQV209Gx PhotoMOS Relays are DIP 6-pin type with 1200V load voltage and low on-resistance of typical 1Ω. These PhotoMOS relays operate at 0.75A continuous load current. The AQV209Gx PhotoMOS relays are PCB mount relays with HF 1 Form A high capacity. These...

In past, we have published many brushed dc motor driver boards for various projects and usually, they have some sort of limitations, as some of them are large in size, require large size heatsink, doesn’t have current feedback, they don't have overload protection, some require...

The project described here is a high voltage step-down regulator based on A4447 general-purpose buck converter chip from Allegro Semiconductor. The output voltage of the board is configured at 3.3V, but it is adjustable from 0.8 to 24V, based on the resistor divider R2 and R5....

Adafruit has teased us with the announcement of the panel-mount TFT ESP32-S2 Wi-Fi Feather Board. It appears to be a succeeding version of the previous ESP32 Feather boards, by changing few positions of the components like the ESP32 module and USB-Serial converter, with the...