Search Results for : AI
![Unipolar-to-Bipolar Level Translator 0V to 5V Unipolar to ±10V Bipolar Converter Unipolar-to-Bipolar Level Translator 0V to 5V Unipolar to ±10V Bipolar Converter](https://www.electronics-lab.com/wp-content/uploads/2024/05/002-9-1024x683.jpg)
Unipolar-to-Bipolar Level Translator 0V to 5V Unipolar to ±10V Bipolar Converter
This design is intended to translate a small unipolar signal to a wide bipolar signal. A common application is to translate a 0 to 5V DAC output to a ±10V bipolar signal. All resistors are 1% but it is advisable to select 0.1% 20 ppm/°C resistors for good gain, offset accuracy, and...
Continue Reading![Smart Power Module for 3-Phase Motor – 5A Smart Power Module for 3-Phase Motor – 5A](https://www.electronics-lab.com/wp-content/uploads/2024/05/001-11-1024x751.jpg)
Smart Power Module for 3-Phase Motor – 5A
This is a Smart power module project designed for Small Power AC Motors. The FNB40560 chip is the heart of the project. A compact inverter project is ideal for small power motors such as fans and pumps. H-bridge configuration can also be created for low current high-voltage brushed DC...
Continue Reading![3-Phase Advance Motion Module – 400VDC – 4A 3-Phase Advance Motion Module – 400VDC – 4A](https://www.electronics-lab.com/wp-content/uploads/2024/05/002-7-1024x819.jpg)
3-Phase Advance Motion Module – 400VDC – 4A
This is an advanced Motion module providing a fully featured, high-performance inverter output stage for AC induction, BLDC and PMSM motors such as refrigerators, fans, and pumps. This module is based on NFA50460 chip which integrates the optimized gate drive of the built−in IGBTs...
Continue Reading![Voltage Controlled Amplifier – VCA Voltage Controlled Amplifier – VCA](https://www.electronics-lab.com/wp-content/uploads/2024/05/004-8-1024x574.jpg)
Voltage Controlled Amplifier – VCA
The project presented here is a Voltage Controlled Amplifier (VCA). A VCA board helps users control the Audio Level from a remote potentiometer. It requires a single-ended audio signal in the input. Gain control voltage can be adjusted through an on-board potentiometer or use an...
Continue Reading![RMS To DC Converter RMS To DC Converter](https://www.electronics-lab.com/wp-content/uploads/2024/05/007-8-1024x623.jpg)
RMS To DC Converter
This is a Precision Micro-power true RMS-to-DC converter built using LTC1966 RMS to DC Converter chip and op-amp LTC1494. The RMS to DC that is Converted by LTC1966 and op-amp is used as a post filter to improve AC Response with Offset and Gain Correction. The circuit converts the AC...
Continue Reading![Lamp Flasher with Timer IC and MOSFET for Automotive Applications Lamp Flasher with Timer IC and MOSFET for Automotive Applications](https://www.electronics-lab.com/wp-content/uploads/2024/05/003-7-1024x487.jpg)
Lamp Flasher with Timer IC and MOSFET for Automotive Applications
This is a mini flasher board that can drive high-power LED or a lamp, mainly designed for automotive applications. The project consists BD9555FVM-C timer chip and MOSFET. The circuit is configured as a flasher, and can also be used as a PWM driver with an adjustable duty cycle and...
Continue Reading![One Channel RF Remote Relay Switch One Channel RF Remote Relay Switch](https://www.electronics-lab.com/wp-content/uploads/2024/05/002-5-1024x651.jpg)
One Channel RF Remote Relay Switch
The project described here is one Channel RF remote receiver Relay board. The project is built using LICAL-EDC-DS001 chip from LINX. The board consists of Encoder/Decoder chip, 433Mhz RF Receiver module, 10 x jumpers to set the address, a Relay to drive the output, U2 5V regulator,...
Continue Reading![High-Voltage (180V) – High-Current (30mA) Operational Amplifier Module High-Voltage (180V) – High-Current (30mA) Operational Amplifier Module](https://www.electronics-lab.com/wp-content/uploads/2024/05/009-5-1024x797.jpg)
High-Voltage (180V) – High-Current (30mA) Operational Amplifier Module
This project provides a platform to evaluate the OPA462 high-voltage, high-current operational amplifier. Multiple component footprints allow the most common circuit configurations. The board accommodates high-voltage and high-current operational amplifier OPA462 from Texas...
Continue Reading