login
This is the image preview of the following page:
Power DUO Source 200 W USB-C PD Reference Design
This USB Power Delivery (PD) reference design will allow users to implement system that require more than 100 W as a power source while also highlighting the industries lowest RDSon solution. The design can output all four of the standard USB Type-C PD source voltages of 5 V, 9 V, 15 V, and 20 V. ... Read More
Image Downloads:
- full (555x790)
- thumbnail (150x150)
- medium (211x300)
- medium_large (555x790)
- large (555x790)
- 1536x1536 (555x790)
- 2048x2048 (555x790)
- re_large (555x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- menu-24x24 (17x24)
- menu-36x36 (25x36)
- menu-48x48 (34x48)
- crp_thumbnail (292x236)
- sendpress-max (422x600)
- woocommerce_thumbnail (300x225)
- woocommerce_single (555x790)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x214)
RELATED POSTS
5 August, 2022 SiliconBrite SBT3000 Power Line Smart AC Switch Controller
30 April, 2020 Arduino-Based SSD uses an ATmega8 & 8 EEPROM chips
16 April, 2016 Mikron 1663RU1 – 16 Mibit SRAM Die-Shot
4 December, 2019 2A to 12A Synchronous Buck Regulators with Peak Efficiencies of 98%
24 April, 2024 Tangram Vision Self-Calibrating HiFi 3D Sensor Features ROS 2 Integration and On-Device AI
24 February, 2021 Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)
