login
This is the image preview of the following page:
12W Dimmer with Soft Start for 12V LEDs
[Customadds id=643821] The circuit presented here is a LED dimmer with a soft-start function. The board can drive a LED up to 12W and the circuit can manage a load up to 1A continuous with 12Vsupply. The circuit is built using SG3525 PWM IC and the IRFR120 MOSFET, SG3525 generates the PWM, and IR... Read More
Image Downloads:
- full (1088x1408)
- thumbnail (116x150)
- medium (232x300)
- medium_large (640x828)
- large (640x829)
- 1536x1536 (1088x1408)
- 2048x2048 (1088x1408)
- re_large (464x600)
- re_xxmedium (178x230)
- re_xmedium (182x236)
- re_medium (247x320)
- re_a_xsmall (134x174)
- re_xsmall (74x96)
- crp_thumbnail (182x236)
- menu-24x24 (19x24)
- menu-36x36 (28x36)
- menu-48x48 (37x48)
- sendpress-max (464x600)
- woocommerce_thumbnail (174x225)
- woocommerce_single (600x776)
- woocommerce_gallery_thumbnail (77x100)
- wp_rp_thumbnail (116x150)
- wp_rp_thumbnail_prop (150x194)
RELATED POSTS
11 May, 2020 Linux-powered development kit is the first to have an AI-enabled Cortex-A7 camera SoC
8 April, 2019 Linear LED controller ICs target dimmable lighting applications
23 April, 2022 LM4040 Shunt Voltage Reference is very stable over different conditions
25 December, 2016 How to Set Up and Program an LCD Display on an Arduino
1 February, 2019 Fast and Cost-Effective Evaluation of the Mass Flow Meters SFM3xxx-AW and SFM3xxx-D
15 October, 2024 FWS-2290 Harnesses Intel Processor N97 for More Powerful Desktop Networking Solutions
