login
This is the image preview of the following page:
2 Channel Relay Shield for Arduino Nano
[Customadds id=643821] 2 Channel Mini easy to use Relay shield for Arduino Nano consists of ULN2003 IC and 2 Mini 12V Relays with NO/NC contacts of 2A-24V Load Capacity. ULN2003 used as Relay coil driver. Relay can be controlled from D3 and D4 of Arduino Nano. Three-pin Header Connector CN1 and C... Read More
Image Downloads:
- full (500x419)
- thumbnail (150x150)
- medium (300x251)
- medium_large (500x419)
- large (500x419)
- 1536x1536 (500x419)
- 2048x2048 (500x419)
- re_large (500x419)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x20)
- menu-36x36 (36x30)
- menu-48x48 (48x40)
- woocommerce_thumbnail (300x225)
- woocommerce_single (500x419)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x126)
RELATED POSTS
24 June, 2021 Variscite and Basler expand collaboration for embedded vision solutions with NXP® i.MX 8M Plus technology
20 January, 2020 SiTime Low-Power Oscillators in tiny packages
4 January, 2018 Osram Develops LED Beam Array Smart Headlamps That Can Analyze Road And Traffic
8 September, 2022 Nexperia NXT4557 SIM Card Interface Level Translator with ENABLE pin
1 June, 2023 Orange Pi 5 Plus SBC is equipped with Rockchip RK3588 SoC
14 May, 2024 Louder Raspberry Pi – Home Media Center powered by Raspberry Pi and TAS5805M DAC
