login
This is the image preview of the following page:
3-Wire Serial LCD using a Shift Register
[Customadds id=643821] Introduction HD44780 based character LCDs require at least 6 I/O lines from microcontroller to display data. Therefore, they are not suitable for low-pin microcontrollers like PIC12F series microchips. In this project, I am going to show how to drive an HD44780 based LCD... Read More
Image Downloads:
- full (669x448)
- thumbnail (150x150)
- medium (300x201)
- medium_large (640x429)
- large (640x429)
- 1536x1536 (669x448)
- 2048x2048 (669x448)
- re_large (669x448)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- menu-24x24 (24x16)
- menu-36x36 (36x24)
- menu-48x48 (48x32)
- crp_thumbnail (292x236)
- sendpress-max (600x402)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x402)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x100)
RELATED POSTS
15 January, 2020 iW-Rainbow-G27S – i.MX8 Quad MAX/Quad Plus Pico ITX SBC
7 April, 2017 3.3V @ 1.5A Buck Regulator
7 December, 2021 Microchip Technology AT24CSWx Serial EEPROMs
20 February, 2020 Sonos acquires the Data-over-sound Pioneer, Chirp
24 August, 2021 Open Source Kryptor FPGA with Dedicated Hardware Security Module
11 May, 2019 0.8μm smartphone image sensor packs 64 megapixels
